plas
Log In

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Alloy Orgalloy® RS 6630 ARKEMA FRANCE
--
--
Filler, Arkema, France
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodARKEMA FRANCE/Orgalloy® RS 6630
Hot deformation temperature0.45MPaISO 75-22245 °C
1.8MPaISO 75-22225 °C
Linear coefficient of thermal expansionMDISO 11359-221.8E-05 cm/cm/°C
TDISO 11359-221.1E-04 cm/cm/°C
Melting temperatureISO 11357-32255 °C
Vicat softening temperature50NISO 3062195 °C
mechanical propertiesTest ConditionTest MethodARKEMA FRANCE/Orgalloy® RS 6630
Tensile creep modulus1hrISO 899-12-- MPa
1000hrISO 899-12-- MPa
Tensile modulusISO 527-22-- MPa
Tensile strainBreakISO 527-22-- %
tensile strengthBreakISO 527-22-- MPa
Electrical performanceTest ConditionTest MethodARKEMA FRANCE/Orgalloy® RS 6630
Compared to the anti leakage trace indexIEC 601122
Dielectric strengthIEC 60243-1234 kV/mm
Dissipation factor100HzIEC 602502--
1MHzIEC 602502--
Relative permittivity100HzIEC 602502--
1MHzIEC 602502--
Surface resistivityIEC 600932-- ohms
Volume resistivityIEC 600932-- ohms·m
Physical propertiesTest ConditionTest MethodARKEMA FRANCE/Orgalloy® RS 6630
densityISO 118321270 kg/m³
Melt Volume Flow Rate (MVR)275°C/2.16kgISO 113328.00 cm³/10min
Water absorption rateSaturationISO 6221.9 %
EquilibriumISO 6220.70 %
flammabilityTest ConditionTest MethodARKEMA FRANCE/Orgalloy® RS 6630
Burning Behav.1.60mmISO 12102HB
Burning Behav.atthicknessh3.20mmISO 12102HB