plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM TF-10LV TAIWAN POLYPLASTICS
DURACON® 
Automotive Applications,Electrical applications
High rigidity,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodTAIWAN POLYPLASTICS/TF-10LV
Rockwell hardnessM-ScaleISO 2039-265
Supplementary InformationTest ConditionTest MethodTAIWAN POLYPLASTICS/TF-10LV
ColourNumberCF2003/CF2004
thermal performanceTest ConditionTest MethodTAIWAN POLYPLASTICS/TF-10LV
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A82.0 °C
Linear coefficient of thermal expansionMD:23to55°CInternal Method1.3E-04 cm/cm/°C
TD:23to55°CInternal Method1.3E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodTAIWAN POLYPLASTICS/TF-10LV
Bending modulusISO 1781700 Mpa
bending strengthISO 17860.0 Mpa
Friction coefficientDynamic2JISK72180.60
Steel - Dynamic3JISK72180.30
Nominal tensile fracture strainISO 527-255 %
Tensile modulusISO 527-21850 Mpa
tensile strengthISO 527-246.0 Mpa
Wear factor0.49MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK7218600 10^-8mm³/N·m
0.49MPa,0.30m/sec5JISK7218100 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK7218700 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodTAIWAN POLYPLASTICS/TF-10LV
Surface resistivityIEC 600937E+12 ohms
Volume resistivityIEC 600931E+13 ohms·cm
Physical propertiesTest ConditionTest MethodTAIWAN POLYPLASTICS/TF-10LV
densityISO 11831.38 g/cm³
melt mass-flow rate190°C/2.16kgISO 113310 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11339.00 cm3/10min
Shrinkage rateTD:2.00mmISO 294-41.7 %
MD:2.00mmISO 294-41.9 %
Water absorption rate23°C,24hrISO 620.70 %
impact performanceTest ConditionTest MethodTAIWAN POLYPLASTICS/TF-10LV
Charpy Notched Impact Strength23°CISO 179/1eA12 kJ/m²