plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO SE1X BK1066 SABIC INNOVATIVE JAPAN
NORYL™ 
Electronic and electrical components,Mechanical component cover,Household products
High temperature resistan,Hydrolysis resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSABIC INNOVATIVE JAPAN/SE1X BK1066
Hot deformation temperature0.45 MPa, 未退火, 6.40 mmASTM D648126 °C
1.8 MPa, 未退火, 6.40 mmASTM D648117 °C
RTIUL 746110 °C
RTI ElecUL 746110 °C
RTI ImpUL 746105 °C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE JAPAN/SE1X BK1066
Bending modulus100 mm 跨距ASTM D7902500 Mpa
bending strength屈服, 100 mm 跨距ASTM D790102 Mpa
elongation屈服ASTM D6388.1 %
断裂ASTM D63820 %
tensile strength屈服ASTM D63867.0 Mpa
断裂ASTM D63853.0 Mpa
Electrical performanceTest ConditionTest MethodSABIC INNOVATIVE JAPAN/SE1X BK1066
Arc resistanceASTM D495PLC 6
Compared to the anti leakage trace indexUL 746PLC 1
Dielectric constant1 MHzASTM D1502.46
50 kHzASTM D1502.52
60 HzASTM D1502.52
Dielectric strength3.20 mm, in OilASTM D14918 KV/mm
Dissipation factor1 MHzASTM D1502.1E-3
60 HzASTM D1503.4E-3
50 HzASTM D1503.4E-3
High voltage arc tracing rateUL 746PLC 4
Surface resistivityASTM D257> 1.0E+15 ohms
Volume resistivityASTM D2572.3E+16 ohms·cm
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE JAPAN/SE1X BK1066
Outdoor applicabilityUL 746Cf1
Shrinkage rate横向流动 2Internal Method0.50 - 0.70 %
流动 : 3.20 mmInternal Method0.50 - 0.70 %
Water absorption rate24 hrASTM D5700.060 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE JAPAN/SE1X BK1066
Dart impact-30°C, Energy at PeakASTM D376332.0 J
23°C, Energy at PeakASTM D376351.0 J
flammabilityTest ConditionTest MethodSABIC INNOVATIVE JAPAN/SE1X BK1066
Radiation board gradeRP100
UL flame retardant rating6.0 mmUL 94V-0
1.5 mmUL 94V-1
injectionTest ConditionTest MethodSABIC INNOVATIVE JAPAN/SE1X BK1066
Back pressure0.300 to 0.700 Mpa
drying temperature105 to 110 °C
drying time3.0 to 4.0 hr
Mold temperature75 to 105 °C
Processing (melt) temperature280 to 310 °C
Screw speed20 to 100 rpm
Spray nozzle temperature280 to 310 °C
Suggested injection volume30 to 70 %
Suggested maximum moisture content0.020 %
Temperature at the front of the material cylinder270 to 310 °C
Temperature at the rear of the barrel250 to 300 °C
Temperature in the middle of the barrel260 to 305 °C

Contact Us

Get App

Top