Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPU-Ether Estane® 2103-85AE TPU Lubrizol Advanced Materials, Inc.
--
Film, profiles
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Estane® 2103-85AE TPU |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 48 |
| 邵氏A | ASTM D2240 | 88 |
| Mechanical properties | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Estane® 2103-85AE TPU |
|---|---|---|---|
| Taber abraser | 1000g,H-22转轮 | ASTM D1044 | 5.00 mg |
| elastomer | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Estane® 2103-85AE TPU |
|---|---|---|---|
| compression set | 25°C,22hr | ASTM D395B | 25 % |
| elongation | 断裂,3.20mm | ASTM D412 | 560 % |
| tensile strength | 断裂,3.20mm | ASTM D412 | 32.0 MPa |
| tear strength | 3.20mm | ASTM D624 | 82.3 kN/m |
| tensile strength | 100%应变,3.20mm | ASTM D412 | 6.90 MPa |
| compression set | 70°C,22hr | ASTM D395B | 80 % |
| tensile strength | 50%应变,3.20mm | ASTM D412 | 5.50 MPa |
| 300%应变,3.20mm | ASTM D412 | 12.1 MPa | |
| elongation at break | 3.20mm | ASTM D412 | 80 % |
| physical property | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Estane® 2103-85AE TPU |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.0to0.60 % |
| TD | ASTM D955 | 0.50to0.70 % | |
| density | ASTM D792 | 1.14 g/cm³ | |
| melt mass-flow rate | 224°C/8.7kg | ASTM D1238 | 24 g/10min |
| Thermal performance | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Estane® 2103-85AE TPU |
|---|---|---|---|
| Glass Transition Temperature | DSC | -38.0 °C | |
| vicat | ASTM D15252 | 67.2 °C | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 1.7E-04 cm/cm/°C |
Contact Us
Get App
Top