Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS Prime ABS PC/ABS Primex Plastics Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS PC/ABS |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 430 J/m |
| Supplementary Information | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS PC/ABS |
|---|---|---|---|
| drying temperature | 82 °C | ||
| Demoulding temperature | 93 °C | ||
| Temperature | 66to93 °C | ||
| mold temperature | 204 °C |
| Mechanical properties | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS PC/ABS |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 3300 MPa | |
| tensile strength | 断裂 | ASTM D638 | 60.0 MPa |
| Flexural modulus | ASTM D790 | 2990 MPa | |
| tensile strength | 屈服 | ASTM D638 | 55.8 MPa |
| physical property | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS PC/ABS |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.10 % |
| density | ASTM D792 | 1.22 g/cm³ |
| Thermal performance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS PC/ABS |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 126 °C |
| vicat | ASTM D1525 | 118 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 138 °C |
| Linear coefficient of thermal expansion | MD | ASTME831 | 6.6E-05 cm/cm/°C |
Contact Us
Get App
Top