plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 A3 GF35 V0 NC CELANESE USA
NILAMID® 
Automotive sector,Electronic and Electrical Applications,Home Furnishings
enhance,Conductive
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodCELANESE USA/A3 GF35 V0 NC
Hot deformation temperature0.45MPaUnannealedISO 75-2/Bf220 °C
1.80MPaAnnealedISO 75-2/Af210 °C
mechanical propertiesTest ConditionTest MethodCELANESE USA/A3 GF35 V0 NC
Charpy Notched Impact Strength-30°CISO 179/1eA7.0 kJ/m²
23°CISO 179/1eA8.0 kJ/m²
Elongation at Break23°CISO 527-22.5 %
Impact strength of simply supported beam without notch-30°CISO 179/1eU48 kJ/m²
23°CISO 179/1eU45 kJ/m²
Tensile modulus23°CISO 527-211500 Mpa
tensile strength23°CISO 527-2150 Mpa
flame retardant performanceTest ConditionTest MethodCELANESE USA/A3 GF35 V0 NC
Extreme Oxygen IndexISO 4589-231 %
Ignition temperature of heating wire3.00mmIEC 60695-2-12850 °C
1.50mmIEC 60695-2-12825 °C
0.75mmIEC 60695-2-12800 °C
Relative temperature of heating wire0.75mmIEC 60695-2-13960 °C
1.50mmIEC 60695-2-13960 °C
3.00mmIEC 60695-2-13960 °C
UL flame retardant ratingUL -94V-0 1.50mm
UL -94V-0 3.00mm
UL -94V-0 0.75mm
Electrical performanceTest ConditionTest MethodCELANESE USA/A3 GF35 V0 NC
Dielectric strength2.00mmIEC 60243-118 KV/mm
Dissipation factor相对漏电起痕指数IEC 60112600 V
Surface resistivityIEC 600931E+13 Ω.cm
Volume resistivityIEC 600931E+15 Ω.cm
Physical propertiesTest ConditionTest MethodCELANESE USA/A3 GF35 V0 NC
Shrinkage rateMDISO 294-40.30 %
TDISO 294-41.00 %
Water absorption rate(23°C,24hr)ISO 621.40 %
(23°C,50RH)ISO 624.00 %