Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT B 4300 G6 BASF GERMANY
Ultradur®
Engineering accessories,Shell,electrical machinery,printed circuit board
High rigidity,Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | BASF GERMANY/B 4300 G6 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 8.5 kJ/m² |
| -30°C | ISO 179/1eA | 7.5 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 65 kJ/m² |
| -30°C | ISO 179/1eU | 45 kJ/m² |
| Mechanical properties | Test Condition | Test Method | BASF GERMANY/B 4300 G6 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 10000 Mpa | |
| bending strength | ISO 178 | 235 Mpa | |
| Flexural modulus | ISO 178 | 9300 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 3.2 % |
| tensile strength | 断裂 | ISO 527-2 | 145 Mpa |
| Electrical performance | Test Condition | Test Method | BASF GERMANY/B 4300 G6 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+16 ohms·cm | |
| Dissipation Factor | 100Hz | IEC 60250 | 2.7E-03 |
| relative permittivity | 100Hz | IEC 60250 | 3.80 |
| 1MHz | IEC 60250 | 3.60 | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 2 |
| Surface Resistivity | IEC 60093 | 1E+15 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.017 |
| flammability | Test Condition | Test Method | BASF GERMANY/B 4300 G6 |
|---|---|---|---|
| HalogenContent | 内部方法 | <100 mg/kg | |
| Flammability level | 1.6mm | IEC 60695-11-10,-20 | HB |
| 0.75mm | IEC 60695-11-10,-20 | HB |
| physical property | Test Condition | Test Method | BASF GERMANY/B 4300 G6 |
|---|---|---|---|
| Apparent density | 0.70to0.80 g/cm³ | ||
| Melt volume flow rate | 275°C/2.16kg | ISO 1133 | 3.00 cm3/10min |
| Shrinkage rate | TD | ISO 294-4 | 1.2 % |
| MD | ISO 294-4 | 0.55 % | |
| viscosity number | ISO 307 | 105 cm³/g | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.20 % |
| 饱和,23°C | ISO 62 | 0.40 % | |
| density | ISO 1183 | 1.54 g/cm³ |
| Thermal performance | Test Condition | Test Method | BASF GERMANY/B 4300 G6 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 220 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 220 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 205 °C | |
| Linear coefficient of thermal expansion | MD：23到80°C | ISO 11359-2 | 2.0E-5到3.0E-5 cm/cm/°C |
| maximum service temperature | 短周期操作 | 210 °C |
Contact Us
Get App
Top