Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA12 PLUSTEK RD101 POLYRAM ISRAEL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | POLYRAM ISRAEL/PLUSTEK RD101 |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 80 |
| thermal performance | Test Condition | Test Method | POLYRAM ISRAEL/PLUSTEK RD101 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 55.0 °C |
| 0.45MPa,Unannealed | ASTM D648 | 125 °C | |
| Melting temperature | ASTM D3417 | 165to175 °C |
| mechanical properties | Test Condition | Test Method | POLYRAM ISRAEL/PLUSTEK RD101 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 450 MPa | |
| bending strength | ASTM D790 | 25.0 MPa | |
| elongation | Break | ASTM D638 | 20 % |
| tensile strength | Yield | ASTM D638 | 30.0 MPa |
| Electrical performance | Test Condition | Test Method | POLYRAM ISRAEL/PLUSTEK RD101 |
|---|---|---|---|
| Dielectric strength | IEC 60243-1 | 55 kV/mm | |
| Surface resistivity | IEC 60093 | 1E+11 ohms | |
| Volume resistivity | IEC 60093 | 1E+10 ohms·cm |
| Physical properties | Test Condition | Test Method | POLYRAM ISRAEL/PLUSTEK RD101 |
|---|---|---|---|
| density | ASTM D792 | 1.02 g/cm³ | |
| Shrinkage rate | MD | 1.5 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ASTM D570 | 0.70 % |
| impact performance | Test Condition | Test Method | POLYRAM ISRAEL/PLUSTEK RD101 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 500 J/m |
| flammability | Test Condition | Test Method | POLYRAM ISRAEL/PLUSTEK RD101 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB |