Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC KumhoSunny PC HCG2530MP Shanghai KumhoSunny Plastics Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny PC HCG2530MP |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 120 J/m |
| Mechanical properties | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny PC HCG2530MP |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 1.5 % |
| tensile strength | ASTM D638 | 120 MPa | |
| Flexural modulus | ASTM D790 | 7500 MPa | |
| bending strength | ASTM D790 | 180 MPa |
| Electrical performance | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny PC HCG2530MP |
|---|---|---|---|
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms |
| flammability | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny PC HCG2530MP |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny PC HCG2530MP |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.10to0.30 % |
| density | ASTM D792 | 1.43 g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 16 g/10min |
| Thermal performance | Test Condition | Test Method | Shanghai KumhoSunny Plastics Co., Ltd./KumhoSunny PC HCG2530MP |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 138 °C |
Contact Us
Get App
Top