Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC HL-5000 MITSUBISHI GAS SHANGHAI
IUPILON™
Automotive components,Special for cast film
High temperature resistan,wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | MITSUBISHI GAS SHANGHAI/HL-5000 |
|---|---|---|---|
| Stretching length | ASTM D638 | 110 % | |
| Flexural modulus | ASTM D790 | 2.3 GPa | |
| bending strength | ASTM D790 | 88.3 Mpa | |
| Impact strength of cantilever beam gap | ASTM D256 | 645 J/m | |
| tensile strength | ASTM D638 | 58.8 Mpa |
| Electrical performance | Test Condition | Test Method | MITSUBISHI GAS SHANGHAI/HL-5000 |
|---|---|---|---|
| Dielectric loss | 10，正切 | ASTM D150 | 0.008 |
| dielectric constant | 10 | ASTM D150 | 27.5 Pf/m |
| physical property | Test Condition | Test Method | MITSUBISHI GAS SHANGHAI/HL-5000 |
|---|---|---|---|
| Shrinkage rate | 平行方向 | 0.6-0.7 % |
| Thermal performance | Test Condition | Test Method | MITSUBISHI GAS SHANGHAI/HL-5000 |
|---|---|---|---|
| Heat distortion temperature | 18.6kgf/cm，HDT | ASTM D648 | 130-140 °C |
| combustibility | UL 94 | V-0 | |
| Heat distortion temperature | 4.6kgf/cm，HDT | ASTM D648 | 136-142 °C |
| Linear coefficient of thermal expansion | 6-7 |
Contact Us
Get App
Top