Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+ABS VAMPALLOY 0024 V0 11 VAMP TECH ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | VAMP TECH ITALY/VAMPALLOY 0024 V0 11 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180 | 无断裂 | |
| Impact strength of cantilever beam gap | ISO 180/A | 25 kJ/m² |
| Electrical performance | Test Condition | Test Method | VAMP TECH ITALY/VAMPALLOY 0024 V0 11 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 2 |
| Mechanical properties | Test Condition | Test Method | VAMP TECH ITALY/VAMPALLOY 0024 V0 11 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | >50 % |
| Tensile modulus | ASTM D638 | 2500 MPa | |
| Flexural modulus | ASTM D790 | 2700 MPa | |
| tensile strength | 屈服 | ASTM D638 | 50.0 MPa |
| bending strength | ASTM D790 | 95.0 MPa |
| flammability | Test Condition | Test Method | VAMP TECH ITALY/VAMPALLOY 0024 V0 11 |
|---|---|---|---|
| Hot filament ignition temperature | 2.0mm | IEC 60695-2-13 | 775 °C |
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 850 °C |
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | VAMP TECH ITALY/VAMPALLOY 0024 V0 11 |
|---|---|---|---|
| Water absorption rate | 饱和 | ASTM D570 | 0.15 % |
| Shrinkage rate | MD | ASTM D955 | 0.60 % |
| TD | ASTM D955 | 0.60 % | |
| density | ASTM D792 | 1.18 g/cm³ |
| Thermal performance | Test Condition | Test Method | VAMP TECH ITALY/VAMPALLOY 0024 V0 11 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648A | 80.0 °C |
| vicat | ASTM D15253 | 110 °C | |
| RTI Imp | UL 746 | 75.0 °C | |
| RTI | UL 746 | 75.0 °C | |
| RTI Elec | UL 746 | 75.0 °C |
Contact Us
Get App
Top