Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PA66 CM1011G-30 TORAY JAPAN

Amilan®

Automotive sector,Shell

Glass 45% reinforced,High modulus application,High impact, Glass 45% reinforced,High modulus application,High impact

Plastic Datasheets

Other performance	Test Condition	Test Method	TORAY JAPAN/CM1011G-30
filler content			1.9%水｜- wt%

Basic Performance	Test Condition	Test Method	TORAY JAPAN/CM1011G-30
Water absorption rate	23℃，24hr	ASTM D-570	无水｜0.9 %

thermal performance	Test Condition	Test Method	TORAY JAPAN/CM1011G-30
Hot deformation temperature	4.6kg/cm2	ASTM D-648	1.9%水｜- °C
Linear coefficient of thermal expansion		ASTM D-696	1.9%水｜- ×10-5cm/cm/℃
Melting temperature		差示扫描测热计DSC	225 °C
specific heat			1.9%水｜- Cal/g·℃
UL-94 flame retardant grade	1/32"	UL 94	1.9%水｜-

mechanical properties	Test Condition	Test Method	TORAY JAPAN/CM1011G-30
Bending modulus	80℃	ASTM D-790	1.9%水｜45000 kg/cm2
		23℃	ASTM D-790	1.9%水｜72000 kg/cm2
		-40℃	ASTM D-790	无水｜140000 kg/cm2
bending strength	23℃	ASTM D-790	1.9%水｜1850 kg/cm2
		-40℃	ASTM D-790	1.9%水｜- kg/cm2
		80℃	ASTM D-790	1.9%水｜- kg/cm2
compressive strength	23℃	ASTM D-695	1.9%水｜- kg/cm2
		-40℃	ASTM D-695	无水｜2600 kg/cm2
		80℃	ASTM D-695	1.9%水｜- kg/cm2
Elongation at Break	23℃	ASTM D-638	无水｜5 %
Impact strength of cantilever beam gap	-40℃，Unnotched1/8	ASTM D-256	无水｜12.5 kg·cm/cm2
		23℃，VNotched1/2	ASTM D-256	无水｜15 kg·cm/cm
		-40℃，Unnotched1/8	ASTM D-256	无水｜12.5 kg·cm/cm
		23℃，Unnotched1/8	ASTM D-256	无水｜98 kg·cm/cm
Rockwell hardness	23℃	ASTM D-785	无水｜121 R-标度
Rockwell hardness		23℃	ASTM D-785	无水｜95 M-标度
Shear strength	23℃	ASTM D-732	无水｜940 kg/cm2
tensile strength	-40℃，Yield	ASTM D-638	1.9%水｜- kg/cm2
		23℃，Yield	ASTM D-638	1.9%水｜1300 kg/cm2
		80℃，Yield	ASTM D-638	1.9%水｜- kg/cm2

Electrical performance	Test Condition	Test Method	TORAY JAPAN/CM1011G-30
Arc resistance	1/8"	ASTM D-495	1.9%水｜119 S
Dielectric constant	106Hz	ASTM D-150	1.9%水｜4.5
Dielectric constant		103Hz	ASTM D-150	1.9%水｜7.4
Dielectric strength	1/8"	ASTM D-149	1.9%水｜15 KV/mm
Dissipation factor	50Hz	ASTM D-150	1.9%水｜0.16
Dissipation factor		106Hz	ASTM D-150	1.9%水｜0.06
Volume resistivity		ASTM D-257	1.9%水｜1012 Ω.cm

Physical properties	Test Condition	Test Method	TORAY JAPAN/CM1011G-30
density		ASTM D-792	无水｜1.5
Taber abraser	1000g,CS-17	ASTM D-1044	无水｜30 mg/1000次

Get App

Top