Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC AZ1900T IDEMITSU JAPAN
TARFLON™ 
Automotive Applications,Home appliance components
Flame retardant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodIDEMITSU JAPAN/AZ1900T
Rockwell hardnessM 计秤ISO 2039-250
R 计秤ISO 2039-2120
R计秤ISO 2039-2120
M计秤ISO 2039-250
Supplementary InformationTest ConditionTest MethodIDEMITSU JAPAN/AZ1900T
ISO Shortcut>PC<
Electrical performanceTest ConditionTest MethodIDEMITSU JAPAN/AZ1900T
dielectric strengthIEC 60243-130 KV/mm
dielectric constant1MHzIEC 602502.85
Compared to the Leakage Tracking Index (CTI)UL 746PLC 2
Volume resistivityASTM D257/IEC 60093- Ω.cm
dielectric constant1 MHzIEC 602502.85
Mechanical propertiesTest ConditionTest MethodIDEMITSU JAPAN/AZ1900T
Impact strength of cantilever beam gapASTM D256/ISO 17980 kg·cm/cm(J/M)ft·lb/in
Flexural modulusASTM D790/ISO 1782400 kg/cm²(MPa)[Lb/in²]
Charpy Notched Impact StrengthISO 17965 kJ/m²
elongationASTM D638/ISO 52764 %
elongation at breakASTM D638/ISO 52792 %
Rockwell hardnessASTM D785-
elongation at breakISO 527-270 %
tensile strength ASTM D638/ISO 52768 kg/cm²(MPa)[Lb/in²]
Nominal tensile fracture strainISO 527-295 %
bending strengthISO 17890.0 Mpa
Flexural modulusISO 1782300 Mpa
Tensile modulusASTM D638/ISO 5272300 kg/cm²(MPa)[Lb/in²]
tensile strength 屈服ISO 527-265.0 Mpa
optical performance Test ConditionTest MethodIDEMITSU JAPAN/AZ1900T
transmissivityISO 13468-185.0to89.0 %
otherTest ConditionTest MethodIDEMITSU JAPAN/AZ1900T
characteristic高流动型
Physical propertiesTest ConditionTest MethodIDEMITSU JAPAN/AZ1900T
Shrinkage rateASTM D9550.5-0.7 %
densityASTM D792/ISO 11831.20
melt mass-flow rateASTM D1238/ISO 1133- g/10min
Water absorption rateASTM D570/ISO 62- %
flammabilityTest ConditionTest MethodIDEMITSU JAPAN/AZ1900T
ISO 9660>PC<
UL flame retardant rating1.5 mmUL 94V-0
1.5mmUL 94V-0
physical property Test ConditionTest MethodIDEMITSU JAPAN/AZ1900T
Melt volume flow rateMVRISO 11335 cm3/10min
Shrinkage rateTD:2.00mm内部方法0.50-0.70 %
Melt volume flow rate300°C/1.2 kgISO 113318.0 cm3/10min
spiral flow length内部方法29.0 CM
Shrinkage rateMD: 2.00 mm内部方法0.5-0.7 %
Water absorption rate平衡,23°C,50%RHISO 620.23 %
Shrinkage rate流量 : 2.00 mm内部方法0.50 - 0.70 %
TD内部方法0.5-0.7 %
MD:2.00mm内部方法0.50-0.70 %
横向流量 : 2.00 mm内部方法0.50 - 0.70 %
Water absorption rate平衡, 23°C, 50% RHISO 620.23 %
Melt volume flow rate300°C/1.2kgISO 11335.00 cm3/10min
Water absorption rate平衡, 23℃, 50% RHISO 620.23 %
Thermal performanceTest ConditionTest MethodIDEMITSU JAPAN/AZ1900T
Combustibility (rate)UL 94V-0/1.5mm
Heat distortion temperature1.8 MPa, 未退火,HDTISO 75-2/A125 °C
UL flame retardant rating4.00 mmUL 945VA
RTI StrUL 74680.0 °C
RTIUL 74680.0 °C
Linear coefficient of thermal expansionASTM D6960.000065 cm/cm/℃
ASTM D696/ISO 11359- mm/mm.℃
Heat distortion temperatureHDTASTM D648/ISO 75131 ℃(℉)
vicatASTM D1525/ISO R306- ℃(℉)
Heat distortion temperature0.45MPa,未退火,HDTISO 75-2/B140 °C
1.8MPa,未退火,HDTISO 75-2/A125 °C
Linear coefficient of thermal expansionMDISO 11359-26.5E-05 cm/cm/°C
UL flame retardant rating1.50 mmUL 94V-0
RTI ImpUL 74680.0 °C
Linear coefficient of thermal expansion流动ISO 11359-26.5E-5 cm/cm/°C
RTI ElecUL 74680.0 °C
injectionTest ConditionTest MethodIDEMITSU JAPAN/AZ1900T
drying time5.0 to 8.0 hr
Temperature in the middle of the barrel260 to 300 °C
Temperature at the rear of the barrel260 to 300 °C
drying temperature120 °C
Temperature at the front of the material cylinder260 to 300 °C
Temperature80 to 120 °C

Contact Us

Get App

Top