Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Epoxy Ebalta AH 100 / GL Ebalta Kunststoff GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 100 / GL |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 30to46 kJ/m² |
| hardness | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 100 / GL |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 7619 | 82to86 |
| Mechanical properties | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 100 / GL |
|---|---|---|---|
| compression stress | ISO 604 | 79.0to89.0 MPa | |
| Flexural modulus | ISO 178 | 2650to3050 MPa | |
| bending strength | ISO 178 | 87.0to97.0 MPa |
| Uncured Properties | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 100 / GL |
|---|---|---|---|
| Viscosity | 25°C | 0.78to1.1 Pa·s | |
| STORAGE STABILITY | 20°C | 45to55 min | |
| Curing Time | 20°C | 18to20 hr | |
| density | 20°C | 1.10to1.14 g/cm³ |
| thermosetting | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 100 / GL |
|---|---|---|---|
| Thermosetting components | 按重量计算的混合比 | 100 | |
| 硬化法 | 按重量计算的混合比:29 |
| Thermal performance | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta AH 100 / GL |
|---|---|---|---|
| Martin's heat-resistant temperature | DIN 53458 | 38to42 °C |
Contact Us
Get App
Top