plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC DF-1006 BK82025 SABIC INNOVATIVE US
LNP™ THERMOCOMP™ 
Plastic bag,Medical and nursing supplies
Low extract,Easy to form,Easy to demould
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodSABIC INNOVATIVE US/DF-1006 BK82025
Hot deformation temperature0.45 MPa, Unannealed, 3.20 mmASTM D648144 °C
1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span6ISO 75-2/Af142 °C
1.8 MPa, Unannealed, 3.20 mmASTM D648140 °C
0.45 MPa, Unannealed, 4.00 mm, 64.0 mm Span6ISO 75-2/Bf146 °C
mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/DF-1006 BK82025
Bending modulus50.0 mm Span4ASTM D7908230 Mpa
--5ISO 1787860 Mpa
bending strengthBreak, 50.0 mm SpanASTM D790149 Mpa
elongationBreakISO 527-2/57.5 %
Yield3ASTM D6382.7 %
Break3ASTM D6383.2 %
Tensile modulusASTM D6388630 Mpa
tensile strengthBreakISO 527-2/5114 Mpa
Break3ASTM D638114 Mpa
Physical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/DF-1006 BK82025
Water absorption rate24 hr, 50% RHASTM D5700.070 %
Equilibrium, 23°C, 50% RHISO 620.070 %
impact performanceTest ConditionTest MethodSABIC INNOVATIVE US/DF-1006 BK82025
Suspended wall beam without notch impact strength23°C6ISO 180/1U58 kJ/m²
23°CASTM D4812910 J/m
injectionTest ConditionTest MethodSABIC INNOVATIVE US/DF-1006 BK82025
Back pressure0.200 to 0.300 Mpa
drying temperature120 °C
drying time4.0 hr
Mold temperature80 to 110 °C
Processing (melt) temperature305 to 325 °C
Screw speed30 to 60 rpm
Suggested maximum moisture content0.020 %
Temperature at the front of the material cylinder320 to 330 °C
Temperature at the rear of the barrel295 to 305 °C
Temperature in the middle of the barrel310 to 320 °C