Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA UC-1006 BK SABIC INNOVATIVE US
LNP™ THERMOCOMP™
Mechanical parts、consumer goods、Medical/nursing supplies
Thermal stability、Carbon fiber reinforced、Filler: Carbon fiber rein、30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/UC-1006 BK |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 52 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 6.4 kJ/m² |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/UC-1006 BK |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 28200 Mpa | |
| bending strength | ASTM D790 | 420 Mpa | |
| Wear factor | Washer | ASTM D3702Modified | 6.00 10^-10in^5-min/ft-lb-hr |
| tensile strength | 断裂 | ASTM D638 | 287 Mpa |
| 断裂 | ISO 527-2 | 263 Mpa | |
| Flexural modulus | ASTM D790 | 22600 Mpa | |
| Tensile modulus | ASTM D638 | 26100 Mpa | |
| elongation | 断裂 | ASTM D638 | 1.5 % |
| bending strength | ISO 178 | 413 Mpa | |
| coefficient of friction | Static | ASTM D3702Modified | 0.21 |
| Flexural modulus | ISO 178 | 22300 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 1.3 % |
| coefficient of friction | Dynamic | ASTM D3702Modified | 0.27 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/UC-1006 BK |
|---|---|---|---|
| Shrinkage rate | MD:24小时 | ISO 294-4 | 0.16 % |
| MD：24小时 | ASTM D955 | 0.20 % | |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.31 % |
| 平衡,23°C,50%RH | ISO 62 | 0.66 % | |
| density | ASTM D792 | 1.32 g/cm³ | |
| ISO 1183 | 1.32 g/cm³ | ||
| Shrinkage rate | TD：24hr | ASTM D955 | 0.60 % |
| TD:24小时 | ISO 294-4 | 0.62 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/UC-1006 BK |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD：-40到40°C | ASTME831 | 4E-05 cm/cm/°C |
| TD：-40到40°C | ISO 11359-2 | 4E-05 cm/cm/°C | |
| MD：-40到40°C | ASTME831 | 1.8E-05 cm/cm/°C | |
| MD：-40到40°C | ISO 11359-2 | 1.9E-05 cm/cm/°C |
Contact Us
Get App
Top