Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA VAMPAMID HT 0023 V0 VAMP TECH ITALY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | VAMP TECH ITALY/VAMPAMID HT 0023 V0 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/A | 3.0 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 30 kJ/m² |
| Mechanical properties | Test Condition | Test Method | VAMP TECH ITALY/VAMPAMID HT 0023 V0 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 2.0 % |
| Tensile modulus | ASTM D638 | 4000 MPa | |
| tensile strength | 屈服 | ASTM D638 | 70.0 MPa |
| Electrical performance | Test Condition | Test Method | VAMP TECH ITALY/VAMPAMID HT 0023 V0 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 2 |
| flammability | Test Condition | Test Method | VAMP TECH ITALY/VAMPAMID HT 0023 V0 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| Hot filament ignition temperature | 1.0到2.0mm | IEC 60695-2-13 | 775 °C |
| Burning wire flammability index | 1.0到2.0mm | IEC 60695-2-12 | 960 °C |
| UL flame retardant rating | 0.8mm | UL 94 | V-0 |
| 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | VAMP TECH ITALY/VAMPAMID HT 0023 V0 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 1.4 % |
| Water absorption rate | 饱和 | ASTM D570 | 0.50 % |
| density | ASTM D792 | 1.37 g/cm³ | |
| Shrinkage rate | TD | ASTM D955 | 1.4 % |
| Thermal performance | Test Condition | Test Method | VAMP TECH ITALY/VAMPAMID HT 0023 V0 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648A | 120 °C |
| vicat | ASTM D15252 | 210 °C | |
| RTI Imp | UL 746 | 140 °C | |
| RTI | UL 746 | 140 °C | |
| RTI Elec | UL 746 | 140 °C |
Contact Us
Get App
Top