Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM FS2022 KEP KOREA
KEPITAL®
--
wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | KEP KOREA/FS2022 |
|---|---|---|---|
| breaking strength | t2mm | ASTM D-732 | 540 Kgf/cm |
| bending strength | 23℃ | ASTM D-790 | 780 Kgf/cm |
| Rockwell hardness | ASTM D-785 | 80 M | |
| IZOD notch impact strength | Notch t3.2mm | ASTM D-256 | 6.5 Kgf.cm/cm |
| Flexural modulus | 23℃ | ASTM D-790 | 2.50×10 Kgf/cm |
| tensile strength | 23℃ | ASTM D-638 | 560 Kgf/cm |
| elongation | 23℃ | ASTM D-638 | 85 % |
| Tensile impact strength | t3.2mm Stype | ASTM D-1822 | 105 Kgf.cm/cm |
| Electrical performance | Test Condition | Test Method | KEP KOREA/FS2022 |
|---|---|---|---|
| Surface Resistivity | ASTM D-257 | 1×10 Ω | |
| Volume resistivity | ASTM D-257 | 1×10 Ω.cm |
| Flame retardant performance | Test Condition | Test Method | KEP KOREA/FS2022 |
|---|---|---|---|
| fire rating | 全色0.75mm | UL94 | HB |
| physical property | Test Condition | Test Method | KEP KOREA/FS2022 |
|---|---|---|---|
| melt mass-flow rate | 190°℃ 2.16kg | ISO 1133 | 8.6 cm²/10min |
| ASTM D-1238 | 10 g/10min | ||
| Shrinkage rate | t3mm 直径100mm | 2.0 % | |
| 23℃ 60%RH | ASTM D-570 | 0.22 % | |
| melt mass-flow rate | 190°℃ 2.16kg | ISO 1133 | 10 g/10min |
| Thermal performance | Test Condition | Test Method | KEP KOREA/FS2022 |
|---|---|---|---|
| 流动 | ISO 11359 | 1.1E-4 cm/cm/"C | |
| melting point | 10℃/min | DSC Method | 165 °C |
| 4.6kgf/cm | ASTM D-648 | 150 °C | |
| Linear expansion coefficient | 20℃ -80℃ | ASTM D-696 | 13×10 °C |
| melting temperature | ISO 11357 | 166 ℃ | |
| 未退火 1.8MPa | IS075 | 100 ℃ | |
| Flame retardancy | t0.8mm | UL-94 | HB |
| 未退火 0.45MPa | IS075 | 150 ℃ | |
| 垂直 | ISO 11359 | 1.1E-4 cm/cm/℃ | |
| 18.6kgf/cm | ASTM D-648 | 110 °C |
Contact Us
Get App
Top