Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
MMW-HDPE TOTAL Polyethylene HDPE HL 535 TOTAL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| film | Test Condition | Test Method | TOTAL/TOTAL Polyethylene HDPE HL 535 |
|---|---|---|---|
| Tensile strain | Break,25µm,BlownFilm | ASTM D882A | 25 % |
| Water Vapor Transmission Rate | 38°C,25µm,BlownFilm | ASTMF1249 | 11 g/m²/24hr |
| Elmendorf tear strength | 25µm,BlownFilm，MD | ASTM D1922 | 8.0 g |
| tensile strength | Break,25µm,BlownFilm | ASTM D882A | 29.6 MPa |
| Dart impact | 25µm,吹塑薄膜 | ASTM D1709A | <50 g |
| tensile strength | Yield,25µm,BlownFilm | ASTM D882A | 29.6 MPa |
| film thickness | 25 µm | ||
| Tensile strain | Break,25µm,BlownFilm，MD | ASTM D882A | 500 % |
| Elmendorf tear strength | 25µm,BlownFilm，TD | ASTM D1922 | 1100 g |
| Secant modulus | 25µm,BlownFilm | ASTM D882A | 1280 MPa |
| physical property | Test Condition | Test Method | TOTAL/TOTAL Polyethylene HDPE HL 535 |
|---|---|---|---|
| melt mass-flow rate | 190°C/21.6kg | ASTM D1238 | 30 g/10min |
| density | ASTM D792 | 0.955 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 0.35 g/10min |
| Thermal performance | Test Condition | Test Method | TOTAL/TOTAL Polyethylene HDPE HL 535 |
|---|---|---|---|
| melting temperature | ASTM D3417 | 132 °C |
Contact Us
Get App
Top