Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC G1910 IDEMITSU JAPAN
TARFLON™
Bottle cap,Home appliance components
enhance,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Supplementary Information | Test Condition | Test Method | IDEMITSU JAPAN/G1910 |
---|---|---|---|
ISO Shortcut | >PC-GF10< |
hardness | Test Condition | Test Method | IDEMITSU JAPAN/G1910 |
---|---|---|---|
Rockwell hardness | M级 | ISO 2039-2 | 65 |
Mechanical properties | Test Condition | Test Method | IDEMITSU JAPAN/G1910 |
---|---|---|---|
Nominal tensile fracture strain | ISO 527-2 | 5.0 % | |
bending strength | ISO 178 | 120 Mpa | |
Charpy Notched Impact Strength | ISO 179 | 8 kJ/m² | |
Tensile strain | 断裂 | ISO 527-2 | 5 % |
Flexural modulus | ISO 178 | 3500 Mpa | |
tensile strength | 断裂 | ISO 527-2 | 80 Mpa |
屈服 | ISO 527-2 | 80.0 Mpa | |
Rockwell hardness | M 计秤 | ISO 2039-2 | 65 |
Electrical performance | Test Condition | Test Method | IDEMITSU JAPAN/G1910 |
---|---|---|---|
Volume resistivity | ASTM D257 | >1.0E+16 ohms·cm | |
dielectric strength | IEC 60243-1 | >22 KV/mm | |
dielectric constant | 1MHz | IEC 60250 | 2.95 |
Dissipation Factor | 1MHz | IEC 60250 | 9E-03 |
flammability | Test Condition | Test Method | IDEMITSU JAPAN/G1910 |
---|---|---|---|
UL flame retardant rating | 0.70mm | UL 94 | HB |
physical property | Test Condition | Test Method | IDEMITSU JAPAN/G1910 |
---|---|---|---|
Shrinkage rate | TD:2.00mm | 内部方法 | 0.60 % |
spiral flow length | 内部方法 | 21.0 CM | |
Shrinkage rate | MD: 2.00 mm | 内部方法 | 0.4 % |
Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.15 % |
Shrinkage rate | TD | 内部方法 | 0.6 % |
MD:2.00mm | 内部方法 | 0.40 % | |
Water absorption rate | 平衡, 23℃, 50% RH | ISO 62 | 0.15 % |
Thermal performance | Test Condition | Test Method | IDEMITSU JAPAN/G1910 |
---|---|---|---|
Linear coefficient of thermal expansion | ISO 11359-2 | 0.000045 cm/cm/℃ | |
Heat distortion temperature | 1.8 MPa, 未退火,HDT | ISO 75-2/A | 142 °C |
1.8MPa,未退火,HDT | ISO 75-2/A | 142 °C | |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 4.5E-05 cm/cm/°C |
Contact Us
Get App
Top