Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 S223-6G-FC DSM HOLAND
Akulon®
Electrical applications,household electrical appliances
Glass fiber reinforced,High rigidity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | DSM HOLAND/S223-6G-FC |
---|---|---|---|
Hot deformation temperature | 0.45 MPa, Unannealed | ISO 75-2/B | 260 °C |
1.8 MPa, Unannealed | ISO 75-2/A | 250 °C | |
Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 7.0E-5 cm/cm/°C |
Flow | ISO 11359-2 | 2.0E-5 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 260 °C |
mechanical properties | Test Condition | Test Method | DSM HOLAND/S223-6G-FC |
---|---|---|---|
Bending modulus | ISO 178 | 8400 Mpa | |
bending strength | ISO 178 | 250 Mpa | |
Tensile modulus | ISO 527-2 | 9950 Mpa | |
Tensile strain | Break | ISO 527-2 | 3.6 % |
tensile strength | Break | ISO 527-2 | 200 Mpa |
Electrical performance | Test Condition | Test Method | DSM HOLAND/S223-6G-FC |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 1 | |
Dielectric strength | IEC 60243-1 | 30 KV/mm | |
Dissipation factor | 100 Hz | IEC 60250 | 9.0E-3 |
1 MHz | IEC 60250 | 0.016 | |
Relative permittivity | 100 Hz | IEC 60250 | 3.80 |
1 MHz | IEC 60250 | 3.50 | |
Surface resistivity | IEC 60093 | -- ohms | |
Volume resistivity | IEC 60093 | 1.0E+14 ohms·cm |
Physical properties | Test Condition | Test Method | DSM HOLAND/S223-6G-FC |
---|---|---|---|
density | ISO 1183 | 1.36 g/cm³ | |
Shrinkage rate | 横向Flow | ISO 294-4 | 1.0 % |
Flow | ISO 294-4 | 0.20 % | |
Water absorption rate | Saturation, 23°C | ISO 62 | 6.0 % |
Equilibrium, 23°C, 50% RH | ISO 62 | 1.6 % |
impact performance | Test Condition | Test Method | DSM HOLAND/S223-6G-FC |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 10 kJ/m² |
-30°C | ISO 179/1eA | 9.0 kJ/m² | |
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 65 kJ/m² |
23°C | ISO 179/1eU | 81 kJ/m² |
flammability | Test Condition | Test Method | DSM HOLAND/S223-6G-FC |
---|---|---|---|
Flammability level | UL 94 | HB |