Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 VESTOSINT® 1141 colored Altuglas International of Arkema Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTOSINT® 1141 colored |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 75 |
| ball-indentation hardness | ISO 2039-1 | 101 MPa |
| Electrical performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTOSINT® 1141 colored |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 85 kV/mm | |
| Volume resistivity | IEC 60093 | 1E+14 ohms·cm |
| Mechanical properties | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTOSINT® 1141 colored |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | >100 % |
| 屈服 | ISO 527-2 | 6.0 % | |
| tensile strength | 屈服 | ISO 527-2 | 42.0 MPa |
| Taber abraser | 100Cycles,500g,CS-17转轮 | ASTM D1242 | <1.00 mg |
| physical property | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTOSINT® 1141 colored |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.06 g/cm³ |
| Water absorption rate | 饱和,100°C2 | ISO 62 | 1.7 % |
| 饱和,23°C3 | ISO 62 | 1.2 % | |
| Particle size | <100.0µm | ISO 4610 | >45.0 wt% |
| Apparent density | ISO 60 | >0.48 g/cm³ | |
| Particle size | <32.0µm | ISO 4610 | <2.0 wt% |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.50 % |
| Particle size | <250.0µm | ISO 4610 | 100.0 wt% |
| Thermal performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTOSINT® 1141 colored |
|---|---|---|---|
| specific heat | DIN 53765 | 2350 J/kg/°C | |
| thermal conductivity | DIN 52612 | 0.22to0.27 W/m/K | |
| Linear coefficient of thermal expansion | MD：23到55°C | ISO 11359-2 | 1E-04 cm/cm/°C |
| melting temperature | ISO 3146 | 176 °C |
Contact Us
Get App
Top