Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS Novodur® P2HGV INEOS Barex
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodINEOS Barex/Novodur® P2HGV
Charpy Notched Impact Strength23°CISO 1796.0 kJ/m²
-30°CISO 1795.0 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 17920 kJ/m²
23°CISO 17918 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/A7.0 kJ/m²
-30°CISO 180/A5.0 kJ/m²
hardnessTest ConditionTest MethodINEOS Barex/Novodur® P2HGV
ball-indentation hardnessISO 2039-1135 MPa
Electrical performanceTest ConditionTest MethodINEOS Barex/Novodur® P2HGV
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 1
Volume resistivityIEC 60093>1.0E+15 ohms·cm
relative permittivity100HzIEC 602502.90
Dissipation Factor100HzIEC 602505E-03
relative permittivity1MHzIEC 602503.10
Surface ResistivityIEC 600931E+14 ohms
dielectric strength1.50mmIEC 60243-132 kV/mm
Dissipation Factor1MHzIEC 602506E-03
Mechanical propertiesTest ConditionTest MethodINEOS Barex/Novodur® P2HGV
Tensile strain断裂,23°CISO 527-22.0 %
tensile strength 屈服,23°CISO 527-274.0 MPa
Tensile modulusISO 527-25500 MPa
tensile strength 断裂,23°CISO 527-274.0 MPa
Flexural modulusISO 1785400 MPa
bending strengthISO 178101 MPa
physical property Test ConditionTest MethodINEOS Barex/Novodur® P2HGV
Melt volume flow rate220°C/10.0kgISO 11333.00 cm³/10min
ash content16 %
Shrinkage rateISO 294-40.20to0.40 %
densityISO 11831.16 g/cm³
Thermal performanceTest ConditionTest MethodINEOS Barex/Novodur® P2HGV
Heat distortion temperature1.8MPa,退火，HDTISO 75-2/A102 °C
vicatISO 306/B50105 °C
Heat distortion temperature0.45MPa,退火，HDTISO 75-2/B106 °C
Linear coefficient of thermal expansionMDISO 11359-14E-05 cm/cm/°C

Contact Us

Get App

Top