Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM N2644Z9 BASF GERMANY
Ultraform®
Automotive Applications,Toy
High impact resistance,enhance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | BASF GERMANY/N2644Z9 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
| 23°C | ISO 179/1eU | 无断裂 |
| hardness | Test Condition | Test Method | BASF GERMANY/N2644Z9 |
|---|---|---|---|
| ball-indentation hardness | H132/30 | ISO 2039-1 | 30.0 Mpa |
| Supplementary Information | Test Condition | Test Method | BASF GERMANY/N2644Z9 |
|---|---|---|---|
| ISOType | 3.38 POM-K,M-GNPR,04-001 | ||
| Automotive Materials | >1.00mm | FMVSS302 | Pass |
| Mechanical properties | Test Condition | Test Method | BASF GERMANY/N2644Z9 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 700 Mpa | |
| tensile strength | 屈服 | ISO 527-2/50 | 22.0 Mpa |
| Tensile strain | 屈服 | ISO 527-2/50 | 25 % |
| Nominal tensile fracture strain | ISO 527-2/50 | 50 % |
| Electrical performance | Test Condition | Test Method | BASF GERMANY/N2644Z9 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 85 KV/mm | |
| Volume resistivity | IEC 60093 | 1E+13 ohms·cm | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | V |
| relative permittivity | 1MHz | IEC 60250 | 5.00 |
| Surface Resistivity | IEC 60093 | 1E+12 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.026 |
| flammability | Test Condition | Test Method | BASF GERMANY/N2644Z9 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | BASF GERMANY/N2644Z9 |
|---|---|---|---|
| Melt volume flow rate | 190°C/2.16kg | ISO 1133 | 12.0 cm3/10min |
| Shrinkage rate | TD | ISO 294-4 | 1.5 % |
| MD | ISO 294-4 | 1.2 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.20 % |
| 饱和,23°C | ISO 62 | 0.50 % |
| Thermal performance | Test Condition | Test Method | BASF GERMANY/N2644Z9 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 164 °C | |
| Linear coefficient of thermal expansion | MD：23到55°C | ISO 11359-2 | 1.4E-04 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 55.0 °C |
| maximum service temperature | 短周期操作 | 100 °C |
Contact Us
Get App
Top