Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PBT LW9330-BK851 DUPONT USA

Cristin®

Electronic and electrical components,Automotive Applications,Industrial applications,Industrial applications,Box/Shell/Cover/Set,Automotive Applications

Flame retardant,Low warpage,Glass fiber reinforced,Filler: Glass fiber reinf,30% by weight ratio),30% filler by weight,Anti warping,Good surface performance

Plastic Datasheets

thermal performance	Test Condition	Test Method	DUPONT USA/LW9330-BK851
Hot deformation temperature	1.80 Mpa，Unannealed	ISO 75A-1	185 ℃
Hot deformation temperature		1.8MPa,Unannealed	ISO 75-2/A	185 °C
Melting temperature		ISO 11357-3	225 °C
Melting temperature			ISO 3146	220 ℃
UL flame retardant rating	0.750 mm	UL 94	HB
		1.50 mm	UL 94	HB
		3.00 mm	UL 94	HB

mechanical properties	Test Condition	Test Method	DUPONT USA/LW9330-BK851
Bending modulus		ISO 178	8400 Mpa
Bending modulus		23℃	ISO 178	8400 MPa
Impact strength of cantilever beam gap	-40 °C, Type 1, Notch A	ISO 180	7 KJ/m
Impact strength of cantilever beam gap		23 °C, Type 1, Notch A	ISO 180	7 KJ/m
Impact strength of simply supported beam without notch	23 ℃, Type 1, Edgewise	ISO 179	55 KJ/m
Suspended wall beam without notch impact strength	23 ℃, Type 1	ISO 180	65 KJ/m
Suspended wall beam without notch impact strength		-40 ℃, Type 1	ISO 180	55 KJ/m
Tensile modulus		ISO 527-2	9800 Mpa
Tensile modulus		23℃	ISO 527-1	9800 MPa
Tensile strain	Break	ISO 527-1	2.3 %
Tensile strain		Break	ISO 527-2	2.3 %
tensile strength	Break	ISO 527-2	135 Mpa

Electrical performance	Test Condition	Test Method	DUPONT USA/LW9330-BK851
Compared to the anti leakage trace index		IEC 60112	PLC 1
Surface resistivity		IEC 60093	>1.0E+15 ohms

Physical properties	Test Condition	Test Method	DUPONT USA/LW9330-BK851
density		ISO 1183	1.42 g/cm³
density			ISO 1183	1.42
MediumDensity			1.27 g/cm³
melt mass-flow rate		ISO 1133	13 g/10min
Melt Volume Flow Rate (MVR)	250°C/5.0kg	ISO 1133	10.0 cm3/10min
Shrinkage rate	Flow	ISO 294-4	0.30 %
		Across Flow	ISO 294-4	0.60 %
		MD	ISO 294-4	0.30 %
		TD	ISO 294-4	0.60 %
SpecificHeatCapacity of Melt			1790 J/kg/°C
ThermalConductivityofMelt			0.28 W/m/K
Top out temperature			170 °C
Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	0.25 %
Water absorption rate		Saturation,23°C,2.00mm	ISO 62	1.0 %

impact performance	Test Condition	Test Method	DUPONT USA/LW9330-BK851
Charpy Notched Impact Strength	23°C	ISO 179/1eA	9.0 kJ/m²
		-30°C	ISO 179/1eA	9.0 kJ/m²
		-40°C	ISO 179/1eA	9.0 kJ/m²
Impact strength of cantilever beam gap	-40°C	ISO 180/1A	7.0 kJ/m²
Impact strength of cantilever beam gap		23°C	ISO 180/1A	7.0 kJ/m²
Impact strength of simply supported beam without notch	-40°C	ISO 179/1eU	50 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	55 kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	45 kJ/m²
Suspended wall beam without notch impact strength		-40°C	ISO 180/1U	45 kJ/m²

flammability	Test Condition	Test Method	DUPONT USA/LW9330-BK851
Burning rate	1.00mm	ISO 3795	28 mm/min
FMVSS flammability		FMVSS302	B
UL flame retardant rating	0.75mm	UL 94	HB
		0.75mm	IEC 60695-11-10,-20	HB
		1.5mm	IEC 60695-11-10,-20	HB
		1.5mm	UL 94	HB

Get App

Top