Mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/C7230P-WH9A311
tensile strength	Type I, 50 mm/min，屈服	ASTM D638	58 Mpa
elongation at break	断裂	ISO 178	30 %
Tensile modulus		GB/T 15585-1995	5.2
Flexural modulus		2 mm/min; ISO 178	4.58
Tensile modulus		1 mm/min; ISO 527	5.58
Impact strength of cantilever beam gap		ASTM D256	0.55 J/cm
Flexural modulus	1.3 mm/min, 50 mm span	ASTM D790	4.53
Charpy Notched Impact Strength		Edgew 80104 sp=62mm; ISO 179/1eA	0.5 J/cm²
elongation at break	Type I, 50 mm/min，断裂	ASTM D638	32 %
Impact strength of cantilever beam gap			@Temperature -30.0
elongation at yield	Type I, 50 mm/min	ASTM D638	4 %
elongation at yield			ISO 178	3.8 %
bending strength	1.3 mm/min, 50 mm span	ASTM D790	98 Mpa
Impact strength of cantilever beam gap		80104; ISO 180/1A	5 kJ/m²
tensile strength	屈服	ISO 178	55 Mpa
bending strength		2 mm/min; ISO 178	99 Mpa

physical property	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/C7230P-WH9A311
Water absorption rate		23°C / 50% RH; ISO 62	0.04 %
Shrinkage rate	Flow	SABIC method	0.0025 - 0.0035 cm/cm
melt mass-flow rate		ASTM D1238	@Load 2.16 kg. Temperature 260
Compound melt index			@Load 2.16 kg. Temperature 260
Compound melt index			MVR [cm^3/10 min]; ISO 1133	49.0 µm/m-°C g/10 min
Water absorption rate	饱和	ISO 62	0.09 %

Thermal performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/C7230P-WH9A311
vicat		Rate B/50; ISO 306	107
Heat distortion temperature	1.8 MPa，HDT	Flatw 80104 sp=64mm; ISO 75/Af	89
Heat distortion temperature		1.8 MPa，HDT	ASTMF1249	88
vicat		Rate B/50; ASTM D1525	108
Linear coefficient of thermal expansion	流动	ISO 11359-2	42 µm/m-°C
		横向	ISO 11359-2	59 µm/m-°C
		流动	GB 1040	42 µm/m-°C
		横向	GB 1040	49 µm/m-°C
vicat		Equate	110
UL flame retardant rating		UL 94	V-0

Get App

Top