Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC DMX9455 GY SABIC INNOVATIVE US
LEXAN™
Bottle cap、Fitness equipment、Automotive sector、Electronic field、Electrical field
scratch resistance 、copolymer、wear resistant、Flame retardant、transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Physical | Test Condition | Test Method | SABIC INNOVATIVE US/DMX9455 GY |
|---|---|---|---|
| Flow | 3.2 mm | Internal | 0.5~0.8 % |
| Specific Volume | ASTM D792 | 0.85 | |
| Taber Abrasion Resistance | ASTM D 1044 | 10 | |
| Moisture Absorption | equilibrium, 23C | ASTM D570 | 0.28 % |
| Melt Volume flow Rate (300°C/1.2 kg) | ISO 1133 | 13 | |
| Taber Abrasion Resistance | Internal | 10 | |
| Moisture Absorption | 23°C / 50% RH | ISO 62 | 0.13 % |
| 23°C/sat | ISO 62 | 0.27 % | |
| Melt Mass-Flow Rate(300°C/1.2 kg) | ASTM D1238 | 14.5 | |
| Moisture Absorption | 50% RH, 24 hrs | ASTM D 570 | 0.04 % |
| 50% RH, equilib | ASTM D570 | 0.13 % | |
| 24 hours | ASTM D570 | 0.08 % |
| Mechanical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/DMX9455 GY |
|---|---|---|---|
| Flexural Modulus | 2 mm/min | ISO 178 | 2450 Mpa |
| Yield | 50 mm/min | ISO 527 | 7 % |
| Break | 50 mm/min | ISO 527 | 40 % |
| Flexural Modulus | 1.3 mm/min, 50 mm span | ASTM D790 | 2600 Mpa |
| Tensile Modulus | 1 mm/min | ISO 527 | 2450 Mpa |
| 50 mm/min | ASTM D638 | 2900 Mpa | |
| Break | 50 mm/min | ISO 527 | 60 Mpa |
| Yield | Type I, 50 mm/min | ASTM D638 | 7 % |
| 50 mm/min | ISO 527 | 80 Mpa | |
| 2 mm/min | ISO 178 | 108 Mpa | |
| Break | Type I, 50 mm/min | ASTM D638 | 65 Mpa |
| Yield | Type I, 50 mm/min | ASTM D638 | 80 Mpa |
| Break | Type I, 50 mm/min | ASTM D638 | 70 % |
| Yield | 1.3 mm/min, 50 mm span | ASTM D790 | 120 Mpa |
| Impact Properties | Test Condition | Test Method | SABIC INNOVATIVE US/DMX9455 GY |
|---|---|---|---|
| Notched Izod Impact Strength (23℃) | ASTM D256 | 30 J/m | |
| 80*10*3 | ISO 180/1U | NB kJ/m² | |
| Notched Izod Impact Strength 23℃ | 80*10*3 | ISO 180/1A | 5 kJ/m² |
| ASTM D256 | 30 J/m | ||
| Notched Izod Impact Strength (23℃) | 80*10*3 | ISO 180/1A | 4 kJ/m² |
| Charpy Notched Impact Strength (23°C) | V-notch Edgew 80*10*3 sp=62mm | ISO 179/1eA | 3 kJ/m² |
| Charpy Notched Impact Strength (-30°C) | V-notch Edgew 80*10*3 sp=62mm | ISO 179/1eA | 3 kJ/m² |
| 23℃ | ASTM D3763 | 30 | |
| Notched Izod Impact Strength (23℃) | ASTM D4812 | NB J/m |
Contact Us
Get App
Top