Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 3410 TEIJIN JAPAN
PANLITE®
Electrical applications、Casters
Flame retardant、Type: High flame retardan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | TEIJIN JAPAN/3410 |
|---|---|---|---|
| Water absorption rate | 24hr，in 23℃ | ASTM D-570 | 0.16 % |
| Mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/3410 |
|---|---|---|---|
| Tensile modulus | ASTM D-638 | 3930(40000) MPa(Kgf/cm | |
| elongation | 断裂 | ASTM D-638 | 4.0 % |
| bending strength | ASTM D-790 | 123(1250) MPa(Kgf/cm | |
| Rockwell hardness | ASTM D-785 | 86 M标度 | |
| Impact strength of cantilever beam gap | 艾氏、带缺口厚度6.4mm | ASTM D-256 | 69(7) J/m(kgf·cm/cm) |
| 艾氏、带缺口厚度3.2mm | ASTM D-256 | 69(7) J/m(kgf·cm/cm) | |
| tensile strength | ASTM D-638 | 79(810) MPa(Kgf/cm | |
| Flexural modulus | ASTM D-790 | 3580(36500) MPa(Kgf/cm | |
| compressive strength | ASTM D-695 | 105(1070) MPa(Kgf/cm |
| Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/3410 |
|---|---|---|---|
| dielectric constant | 60Hz | ASTM D-150 | 3.16 |
| Dielectric loss | 10，正切 | ASTM D-150 | 0.009 |
| arc resistance | IEC 112 | 185 V | |
| Volume resistivity | ASTM D-257 | 1×10 Ω.cm | |
| dielectric strength | 快速加压值厚度1.6mm | ASTM D-149 | 30 KV/mm |
| Dielectric loss | 60Hz，正切 | ASTM D-150 | 0.0008 |
| dielectric constant | 10 | ASTM D-150 | 3.07 |
| processability | Test Condition | Test Method | TEIJIN JAPAN/3410 |
|---|---|---|---|
| Shrinkage rate | 垂直方向 | ASTM D-955 | 0.4-0.6 % |
| 流动方向 | ASTM D-955 | 0.3-0.5 % |
| physical property | Test Condition | Test Method | TEIJIN JAPAN/3410 |
|---|---|---|---|
| UL flame retardant rating | 2.5mm | UL 94 | V-0/5VA |
| 0.43mm | UL 94 | V-2 | |
| 0.75mm | UL 94 | V-0 | |
| density | JIS K-7112 | 1.29 |
| Thermal performance | Test Condition | Test Method | TEIJIN JAPAN/3410 |
|---|---|---|---|
| Heat distortion temperature | 负荷0.451MPa(4.6kgf/cm，HDT | JIS K-7207 | 149 °C |
| 负荷1.813MPa(18.6kgf/cm，HDT | JIS K-7207 | 146 °C | |
| TEMPERATURE | 电学式，厚度1.47mm | UL 746B | 130 °C |
| 非冲击式，厚度1.47mm | UL 746B | 130 °C | |
| 冲击式，厚度1.47mm | UL 746B | 120 °C | |
| Linear coefficient of thermal expansion | 垂直方向 | ASTM D-696 | 6.7 10 |
| 流动方向 | ASTM D-696 | 4.0 10 |
Contact Us
Get App
Top