Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP CP GFR 20 FR V0 EMAS Plastik San.Tic.AS.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EMAS Plastik San.Tic.AS./CP GFR 20 FR V0 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | >8.0 kJ/m² |
| hardness | Test Condition | Test Method | EMAS Plastik San.Tic.AS./CP GFR 20 FR V0 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 65to70 |
| Mechanical properties | Test Condition | Test Method | EMAS Plastik San.Tic.AS./CP GFR 20 FR V0 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 4000to7500 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | >4.0 % |
| tensile strength | 屈服 | ISO 527-2 | 50.0to80.0 MPa |
| flammability | Test Condition | Test Method | EMAS Plastik San.Tic.AS./CP GFR 20 FR V0 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | |
| Hot filament ignition temperature | VDE0471/2 | 960 °C |
| physical property | Test Condition | Test Method | EMAS Plastik San.Tic.AS./CP GFR 20 FR V0 |
|---|---|---|---|
| Shrinkage rate | 0.35to0.55 % | ||
| density | ISO 1183 | 1.24to1.30 g/cm³ | |
| melt mass-flow rate | 230°C/2.16kg | ISO 1133 | 3.0to18 g/10min |
| Thermal performance | Test Condition | Test Method | EMAS Plastik San.Tic.AS./CP GFR 20 FR V0 |
|---|---|---|---|
| vicat | ISO 306/B | 110 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 110 °C |
| melting temperature | ISO 3146 | 160 °C |
Contact Us
Get App
Top