Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

LCP B230 JAPAN POLYPLASTIC
LAPEROS®
Metal substitution
Conductive,High rigidity,high strength,Halogen-free,Flame retardant,Carbon fiber reinforced,Special strength and stif,30% carbon fiber reinforc,Conductive
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic Performance | Test Condition | Test Method | JAPAN POLYPLASTIC/B230 |
---|---|---|---|
density | ISO 1183 | 1500 kg/m |
thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/B230 |
---|---|---|---|
Combustibility | UL 94 | V-0 | |
Crystallization peak temperature | ISO 11357-1 | 280 °C | |
Hot deformation temperature | 1.80MPa | ISO 75-1 | 235 °C |
0.45MPa | ISO 75-1 | 250 °C | |
8.00MPa | ISO 75-1 | 186 °C | |
Linear coefficient of thermal expansion | normal | ISO 11359-1 | 4E-06 cm/cm℃ |
parallel | ISO 11359-1 | 1E-06 cm/cm℃ | |
Vicat softening temperature | 50℃/h 50N | ISO 306 | 167 °C |
mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/B230 |
---|---|---|---|
Bending modulus | 23℃ | ISO 178 | 25500 Mpa |
bending strength | 23℃ | ISO 178 | 320 Mpa |
Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 6.00 KJ/m |
elongation | Break | ISO 527-1 | 0.70 % |
Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 10.00 KJ/m |
Impact strength of simply supported beam without notch | 23℃ | ISO 179/1eU | 15.0 KJ/m |
Rockwell hardness | ISO 2039-2 | 99 M Scale | |
Suspended wall beam without notch impact strength | 23℃ | ISO 180/1U | 12.0 KJ/m |
Tensile modulus | ISO 527-1 | 31800 Mpa | |
tensile strength | ISO 527-1 | 200 Mpa |
Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/B230 |
---|---|---|---|
Relative permittivity | 1000Hz | IEC 60250 | 32.0 |
Surface resistivity | IEC 60093 | 1E+02 ohms | |
Volume resistivity | IEC 60093 | 0.10 ohm.m |
Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/B230 |
---|---|---|---|
Shrinkage rate | parallel | ISO 2577 | 0.10 % |
normal | ISO 2577 | 0.0 % |