Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM TS-25H KEP KOREA
KEPITAL®
--
wear resistant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | KEP KOREA/TS-25H |
|---|---|---|---|
| Water absorption rate | ISO 62 | 0.2 % | |
| melt mass-flow rate | 190℃, 2.16kg | ISO 1133 | 24 g/10 min |
| density | ISO 1183 | 1.4 g/cm³ |
| Mechanical properties | Test Condition | Test Method | KEP KOREA/TS-25H |
|---|---|---|---|
| elongation at yield | 23℃ | ISO 527 | 8.5 Mpa |
| bending strength | ASTM D790/ISO 178 | 12000 kg/cm²(MPa)[Lb/in²] | |
| Charpy Notched Impact Strength | 缺口 | ISO 179 | 5.5 kJ/m² |
| Flexural modulus | ASTM D790/ISO 178 | 37000 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | 23℃ | ISO 527 | 60 Mpa |
| Flexural modulus | 23℃ | ISO 178 | 2550 Mpa |
| Shrinkage rate | t:3mm,Φ100mm | KEP (平行方向) | 2.0 % |
| elongation at break | 23℃ | ISO 527 | 23 % |
| bending strength | 23℃ | ISO 178 | 83 Mpa |
| Electrical performance | Test Condition | Test Method | KEP KOREA/TS-25H |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1×1014 Ω.cm | |
| Surface Resistivity | IEC 60093 | 1×1016 Ω |
| other | Test Condition | Test Method | KEP KOREA/TS-25H |
|---|---|---|---|
| characteristic | 耐磨性能良好 |
| Physical properties | Test Condition | Test Method | KEP KOREA/TS-25H |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.40 |
| Thermal performance | Test Condition | Test Method | KEP KOREA/TS-25H |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa，HDT | ISO 75 | 98 °C |
| Linear coefficient of thermal expansion | ISO 11359 | 12 ×10-5℃-1 | |
| melting temperature | ISO 3146 | 168 °C |
Contact Us
Get App
Top