Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Phenolic Resiten® LEM400 Iten Industries
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Iten Industries/Resiten® LEM400 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 流量:1.57mm | ASTM D256 | 62 J/m |
| 横向流量:1.57mm | ASTM D256 | 38 J/m |
| Electrical performance | Test Condition | Test Method | Iten Industries/Resiten® LEM400 |
|---|---|---|---|
| Dissipation Factor | 1.57mm,1kHz | ASTM D150 | 0.15 |
| dielectric strength | 1.57mm | ASTM D149 | 12 kV/mm |
| dielectric constant | 1.57mm,1kHz | ASTM D150 | 8.43 |
| Dissipation Factor | 1.57mm,1MHz | ASTM D150 | 0.051 |
| arc resistance | 1.57mm | ASTM D495 | 121 sec |
| dielectric strength | 1.57mm | ASTM D149 | 59000 V |
| dielectric constant | 1.57mm,1MHz | ASTM D150 | 6.28 |
| Mechanical properties | Test Condition | Test Method | Iten Industries/Resiten® LEM400 |
|---|---|---|---|
| tensile strength | 横向流量:1.57mm | ASTM D638 | 62.7 MPa |
| bending strength | 1.57mm3 | ASTM D790 | 207 MPa |
| 1.57mm4 | ASTM D790 | 129 MPa | |
| tensile strength | 流量:1.57mm | ASTM D638 | 108 MPa |
| compressive strength | 1.57mm7 | ASTM D695 | >310 MPa |
| 1.57mm5 | ASTM D695 | 85.5 MPa | |
| 1.57mm6 | ASTM D695 | 84.1 MPa |
| flammability | Test Condition | Test Method | Iten Industries/Resiten® LEM400 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Iten Industries/Resiten® LEM400 |
|---|---|---|---|
| Water absorption rate | 24hr,1.57mm | ASTM D570 | 2.9 % |
| density | ASTM D792 | 1.50 g/cm³ |
Contact Us
Get App
Top