Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM Copolymer Kepital® F30-63 KEP KOREA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | KEP KOREA/Kepital® F30-63 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 59 J/m |
| hardness | Test Condition | Test Method | KEP KOREA/Kepital® F30-63 |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 80 |
| Electrical performance | Test Condition | Test Method | KEP KOREA/Kepital® F30-63 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+10 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1E+11 ohms |
| Mechanical properties | Test Condition | Test Method | KEP KOREA/Kepital® F30-63 |
|---|---|---|---|
| Flexural modulus | 23°C | ASTM D790 | 2560 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 60.0 MPa |
| bending strength | 屈服,23°C | ASTM D790 | 83.0 MPa |
| elongation | 断裂,23°C | ASTM D638 | 40 % |
| shear strength | ASTM D732 | 55.0 MPa |
| flammability | Test Condition | Test Method | KEP KOREA/Kepital® F30-63 |
|---|---|---|---|
| UL flame retardant rating | 0.800mm | UL 94 | HB |
| physical property | Test Condition | Test Method | KEP KOREA/Kepital® F30-63 |
|---|---|---|---|
| Shrinkage rate | MD：3.00mm | ASTM D955 | 2.0 % |
| Water absorption rate | 平衡,23°C | ASTM D570 | 0.22 % |
| density | ASTM D792 | 1.41 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 27 g/10min |
| Thermal performance | Test Condition | Test Method | KEP KOREA/Kepital® F30-63 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 110 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 158 °C | |
| 熔融温度，HDT | ASTM D648 | 165 °C | |
| Linear coefficient of thermal expansion | MD：20到80°C | ASTM D696 | 1.3E-04 cm/cm/°C |
Contact Us
Get App
Top