Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/PBT 6620-1001 SABIC INNOVATIVE US
XENOY™
Household daily necessiti、Electrical applications、Automotive Applications
Chemical resistance、Low temperature impact re
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | SABIC INNOVATIVE US/6620-1001 |
|---|---|---|---|
| Heat Deflection Temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 60.0 °C |
| RTIElec | UL746 | 75.0 °C | |
| Heat Deflection Temperature | 0.45MPa,未退火,3.20mm | ASTMD648 | 93.0 °C |
| Linear thermal expansion coefficient | MD：60to138°C | ASTME831 | 1E-04 cm/cm/°C |
| TD：-40到40°C | ASTME831 | 9.8E-05 cm/cm/°C | |
| MD：-40to40°C | ASTME831 | 9.4E-05 cm/cm/°C | |
| RTIStr | UL746 | 75.0 °C | |
| Heat Deflection Temperature | 1.8MPa,未退火,3.20mm | ASTMD648 | 53.0 °C |
| Evolution Calendar intelligent importer | UL746 | 75.0 °C | |
| Heat Deflection Temperature | 0.45MPa,未退火,6.40mm | ASTMD648 | 98.9 °C |
| Hardness | Test Condition | Test Method | SABIC INNOVATIVE US/6620-1001 |
|---|---|---|---|
| Rockwell Hardness | R级 | ASTMD785 | 108 |
| Physical | Test Condition | Test Method | SABIC INNOVATIVE US/6620-1001 |
|---|---|---|---|
| Moisture Absorption | 24hr | ASTMD570 | 0.080 % |
| Density / Specific Gravity | ASTMD792 | 1.20 g/cm³ | |
| Modeling Shrinkage | MD：3.20mm | 内部方法 | 1.6to1.8 % |
| Specific Volume | ASTMD792 | 0.838 cm³/g | |
| Modeling Shrinkage | TD：3.20mm | 内部方法 | 1.6to1.8 % |
| Mechanical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/6620-1001 |
|---|---|---|---|
| Flexural Modulus | 50.0mm跨距 | ASTMD790 | 1720 Mpa |
| Flexural Strength | 屈服,50.0mm跨距 | ASTMD790 | 64.1 Mpa |
| Tensile Elongation | 断裂 | ASTMD638 | 180 % |
| Tensile Strength | 屈服 | ASTMD638 | 43.4 Mpa |
| Impact Properties | Test Condition | Test Method | SABIC INNOVATIVE US/6620-1001 |
|---|---|---|---|
| Notched Izod Impact Strength | 23°C | ASTMD256 | 900 J/m |
| 23°C | ASTMD4812 | 1600 J/m | |
| Gardner Impact | 23°C | ASTMD3029 | 54.2 J |
| Notched Izod Impact Strength | -30°C | ASTMD256 | 670 J/m |
| Gardner Impact | 23°C4 | ASTMD3029 | 54.2 J |
| Flammability | Test Condition | Test Method | SABIC INNOVATIVE US/6620-1001 |
|---|---|---|---|
| Flame Rating | 1.5mm | UL94 | HB |
| Electrical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/6620-1001 |
|---|---|---|---|
| Dissipation Factor? | 100Hz | ASTMD150 | 2E-03 |
| 1MHz | ASTMD150 | 0.020 | |
| Arc Resistance | ASTMD495 | PLC 5 | |
| Dielectric Constant | 1MHz | ASTMD150 | 3.00 |
| Comparative Tracking Index | CTI | UL746 | PLC 0 |
| High Amp Arc Ignition | HAI | UL746 | PLC 0 |
| Dielectric Strength | 3.20mm,在油中 | ASTMD149 | 19 KV/mm |
| Volume Resistivity | ASTMD257 | 5.5E+16 ohms·cm | |
| Dielectric Constant | 100Hz | ASTMD150 | 3.10 |
| Dissipation Factor? | 100kHz | ASTMD150 | 0.020 |
| Hot-wire Ignition | HWI | UL746 | PLC 3 |
| Dielectric Strength | 1.60mm,在油中 | ASTMD149 | 28 KV/mm |
| Dielectric Constant | 100kHz | ASTMD150 | 3.00 |
| High Voltage Arc Tracking Rate | HVTR | UL746 | PLC 1 |
| Dielectric Strength | 3.20mm,inAir | ASTMD149 | 19 KV/mm |
Contact Us
Get App
Top