Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

AS(SAN) RTP 500 TFE 15 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | RTP US/RTP 500 TFE 15 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 93.3 °C |
| 0.45MPa,Unannealed | ASTM D648 | 98.9 °C |
| mechanical properties | Test Condition | Test Method | RTP US/RTP 500 TFE 15 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 3450 MPa | |
| bending strength | ASTM D790 | 103 MPa | |
| elongation | Break | ASTM D638 | 2.5 % |
| Tensile modulus | ASTM D638 | 3450 MPa | |
| tensile strength | ASTM D638 | 62.1 MPa |
| Electrical performance | Test Condition | Test Method | RTP US/RTP 500 TFE 15 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | RTP US/RTP 500 TFE 15 |
|---|---|---|---|
| density | ASTM D792 | 1.17 g/cm³ | |
| Shrinkage rate | MD:3.18mm | ASTM D955 | 0.40 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.20 % |
| impact performance | Test Condition | Test Method | RTP US/RTP 500 TFE 15 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 27 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 210 J/m |
| flammability | Test Condition | Test Method | RTP US/RTP 500 TFE 15 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |