Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

UHMWPE GUR 5113 CELANESE USA
GUR®
Automotive components,Electronic and electrical components,Sheet level,Sports equipment,Home appliance components
Corrosion resistance,wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | CELANESE USA/GUR 5113 |
|---|---|---|---|
| Shore hardness | Shore D, 15 Sec | ISO 868 | 62 |
| thermal performance | Test Condition | Test Method | CELANESE USA/GUR 5113 |
|---|---|---|---|
| Vicat softening temperature | ISO 306/B50 | 80.0 °C |
| mechanical properties | Test Condition | Test Method | CELANESE USA/GUR 5113 |
|---|---|---|---|
| Nominal tensile fracture strain | ISO 527-2/1B | 430 % | |
| Tensile modulus | ISO 527-2/1B | 800 Mpa | |
| Tensile strain | Yield | ISO 527-2/1B | 12 % |
| tensile strength | 50% Strain | ISO 527-2/1B | 19.0 Mpa |
| Break | ISO 527-2/1B | 37.0 Mpa | |
| Yield | ISO 527-2/1B | 22.0 Mpa | |
| Wear by Sandslurry Method | Internal Method | 130 |
| Electrical performance | Test Condition | Test Method | CELANESE USA/GUR 5113 |
|---|---|---|---|
| Surface resistivity | IEC 60093 | > 1.0E+12 ohms | |
| Volume resistivity | IEC 60093 | > 1.0E+14 ohms·cm |
| Physical properties | Test Condition | Test Method | CELANESE USA/GUR 5113 |
|---|---|---|---|
| Apparent density | ISO 60 | 0.50 g/cm³ | |
| average molecular weight | 3700000 g/mol | ||
| melt mass-flow rate | 190°C/21.6 kg | ISO 1133 | < 0.10 g/10 min |
| Particle size distribution | d | Pellet | |
| Stickiness | Elongational Stress F - 150/10 | ISO 11542-2 | 0.120 Mpa |
| --3 | ISO 1628 | 1900.0 ml/g | |
| -- | ISO 1628 | 1700.0 ml/g |
| impact performance | Test Condition | Test Method | CELANESE USA/GUR 5113 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 11542-2 | 190 kJ/m² |