Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 S223-G6U DSM HOLAND
Akulon®
--
enhance,Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | DSM HOLAND/S223-G6U |
|---|---|---|---|
| Tensile modulus | 1mm/min | ISO 527-1 | 10000 MPa |
| fracture strain | 5mm/min | ISO 527-1 | 3.5 % |
| Impact strength of cantilever beam gap | 23℃ | ISO 180/1C | 65 KJ/m |
| 23℃ | ISO 180/1A | 13 KJ/m | |
| Breaking stress | 5mm/min | ISO 527-1 | 195 MPa |
| Electrical performance | Test Condition | Test Method | DSM HOLAND/S223-G6U |
|---|---|---|---|
| dielectric constant | 50Hz | IEC 60250 | 3.9 |
| Volume resistivity | IEC 60093 | 1E+15 Ohm.cm | |
| Surface Resistivity | IEC 60093 | 1E+15 Ohm | |
| dielectric constant | 1MHz | IEC 60250 | 3.5 |
| Dielectric loss | 1MHz | IEC 60250 | 160 E-4 |
| 50Hz | IEC 60250 | 90 E-4 |
| physical property | Test Condition | Test Method | DSM HOLAND/S223-G6U |
|---|---|---|---|
| Water absorption rate | 23℃,50%相对湿度 | ISO 62 | 1.6 % |
| density | ISO 1183 | 1.36 g/cm |
| Thermal performance | Test Condition | Test Method | DSM HOLAND/S223-G6U |
|---|---|---|---|
| Heat distortion temperature | 0.45，HDT | ISO 75-2 | 260 ℃ |
| 1.8Mpa，HDT | ISO 75-2 | 250 ℃ | |
| UL flame retardant rating | UL94 | HB |
Contact Us
Get App
Top