Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE)+TPE NORYL™ WCD883AU resin SABIC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodSABIC/NORYL™ WCD883AU resin
Shore hardness邵氏A,30秒ASTM D2240<87
Mechanical propertiesTest ConditionTest MethodSABIC/NORYL™ WCD883AU resin
elongation断裂2ASTM D638260 %
断裂,136°C3UL 1581240 %
断裂ISO 527-2/50240 %
Flexural modulus--ISO 17845.0 MPa
elongation断裂UL 1581260 %
tensile strength 断裂,136°C3UL 158119.0 MPa
Flexural modulus100mm跨距ASTM D79037.0 MPa
tensile strength 断裂UL 158118.0 MPa
断裂2ASTM D63814.0 MPa
断裂ISO 527-2/5015.0 MPa
Electrical performanceTest ConditionTest MethodSABIC/NORYL™ WCD883AU resin
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
dielectric constant1.00GHzASTM D1503.00
Volume resistivityASTM D2575.6E+15 ohms·cm
dielectric strength2.00mm,inOilASTM D14925 kV/mm
Surface ResistivityASTM D2572.5E+16 ohms
Dissipation Factor1.00GHzASTM D1503E-03
flammabilityTest ConditionTest MethodSABIC/NORYL™ WCD883AU resin
Smoke densityNon-Flame,0.5mmplaque,Ds,maxASTME662140
Burning wire flammability index3.0mmIEC 60695-2-12850 °C
Hot filament ignition temperature3.0mmIEC 60695-2-13775 °C
Smoke densityFlame,0.5mmplaque,Ds,maxASTME66257
Limiting Oxygen IndexISO 4589-236 %
VerticalFlameTestEN50265-2-1PASSES
physical property Test ConditionTest MethodSABIC/NORYL™ WCD883AU resin
Water absorption rate23°C,24hrISO 620.020 %
melt mass-flow rate250°C/10.0kgASTM D12384.0 g/10min
densityASTM D7921.17 g/cm³
Thermal performanceTest ConditionTest MethodSABIC/NORYL™ WCD883AU resin
Heat distortion temperature100°CUL 158123 %

Contact Us

Get App

Top