Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS J-1200/CF/10 USA TLC
--
Automotive electronics, bushings, enterprise equipment, conveyor parts, packaging
Anti static, conductive
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic Performance | Test Condition | Test Method | USA TLC/J-1200/CF/10 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.40 % |
| thermal performance | Test Condition | Test Method | USA TLC/J-1200/CF/10 |
|---|---|---|---|
| Combustibility | 1.59mm | UL 94 | HB |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D-648 | 104 ℃ |
| 1.80MPa,Unannealed | ASTM D-648 | 98.9 ℃ |
| mechanical properties | Test Condition | Test Method | USA TLC/J-1200/CF/10 |
|---|---|---|---|
| Bending modulus | 23℃ | ASTM D-790 | 6890 MPa |
| bending strength | 23℃,Break | ASTM D-790 | 110 MPa |
| Elongation at Break | 23℃ | ASTM D-638 | 1.7 % |
| Impact strength of cantilever beam gap | 23℃,3.18mm | ASTM D-256 | 42.7 J/m |
| Suspended wall beam without notch impact strength | 23℃,3.18mm | ASTM D-256 | 187 J/m |
| Tensile modulus | 23℃ | ASTM D-638 | 7580 MPa |
| tensile strength | 23℃,Break | ASTM D-638 | 82.7 MPa |
| Electrical performance | Test Condition | Test Method | USA TLC/J-1200/CF/10 |
|---|---|---|---|
| Surface resistivity | ASTM D-257 | 5E+02 ohms | |
| Volume resistivity | ASTM D-257 | 50 ohm.cm |
| Physical properties | Test Condition | Test Method | USA TLC/J-1200/CF/10 |
|---|---|---|---|
| density | ASTM D-792 | 1.10 | |
| Shrinkage rate | Flow | ASTM D-955 | 0.10 % |