Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT 6B+G-EC Witcom Engineering Plastics B.V.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | Witcom Engineering Plastics B.V./6B+G-EC |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 8.0 kJ/m² | |
| tensile strength | 断裂 | ISO 527-2 | 100 MPa |
| Tensile strain | 断裂 | ISO 527-2 | 1.5 to 3.5 % |
| Flexural modulus | ISO 178 | 6500 MPa | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 45 kJ/m² | |
| bending strength | ISO 178 | 135 MPa |
| Electrical performance | Test Condition | Test Method | Witcom Engineering Plastics B.V./6B+G-EC |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1.0E+4 到 1.0E+6 ohm |
| physical property | Test Condition | Test Method | Witcom Engineering Plastics B.V./6B+G-EC |
|---|---|---|---|
| Water absorption rate | 饱和, 23℃ | ISO 62 | 0.30 % |
| density | ISO 1183 | 1.54 g/cm³ | |
| Shrinkage rate | MD：3.00 mm | ISO 294-4 | 0.35 to 0.55 % |
| Water absorption rate | 平衡, 23℃, 50% RH | ISO 62 | 0.15 % |
| Thermal performance | Test Condition | Test Method | Witcom Engineering Plastics B.V./6B+G-EC |
|---|---|---|---|
| Linear coefficient of thermal expansion | ISO 11359-2 | 0.000035 cm/cm/℃ | |
| UL flame retardant rating | 3.00 mm | UL 94 | HB |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 205 ℃ |
| RTI Imp | 3.00 mm | UL 746 | 125 ℃ |
Contact Us
Get App
Top