Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC MN-3600H TEIJIN JAPAN
PANLITE®
Electrical field、Electronic field、Automotive sector
heat-resisting、Flame retardant、Good impact resistance、Good liquidity、Halogen-free
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | TEIJIN JAPAN/MN-3600H |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179 | NoBreak |
| Mechanical properties | Test Condition | Test Method | TEIJIN JAPAN/MN-3600H |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 95.0 kg/cm²(MPa)[Lb/in²] | |
| Tensile stress | 屈服 | ISO527-2/50 | 60.0 Mpa |
| Flexural modulus | ASTM D790/ISO 178 | 2300 kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 7.0 % | |
| Bending modulus 2 | ISO178 | 2300 Mpa | |
| Bending stress 2 | ISO178 | 95.0 Mpa | |
| Tensile strain | 屈服 | ISO527-2/50 | 7.0 % |
| Tensile elongation at break (elongation at break) | ASTM D638/ISO 527 | 100 % | |
| tensile strength | ASTM D638/ISO 527 | 60.0 kg/cm²(MPa)[Lb/in²] | |
| Tensile stress | 断裂 | ISO527-2/50 | 50.0 Mpa |
| Tensile modulus | ISO527-2/1 | 2350 Mpa | |
| ASTM D638/ISO 527 | 2350 kg/cm²(MPa)[Lb/in²] | ||
| Tensile strain | 断裂 | ISO527-2/50 | 100 % |
| Electrical performance | Test Condition | Test Method | TEIJIN JAPAN/MN-3600H |
|---|---|---|---|
| Surface Resistivity | IEC60093 | >1.0E+15 ohms |
| other | Test Condition | Test Method | TEIJIN JAPAN/MN-3600H |
|---|---|---|---|
| 抗撞击性良好、耐热性高、良好的流动性、无卤、阻燃性能 | |||
| notes | 以上加工数据，为参考值.以生产厂商设备的实际状况而进行调整 | ||
| purpose | 电气/电子应用领域、汽车领域的应用 | ||
| colour | 不透明 |
| Physical properties | Test Condition | Test Method | TEIJIN JAPAN/MN-3600H |
|---|---|---|---|
| Mold Shrinkage | ASTM D955 | 0.50-0.70 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.22 % |
| flammability | Test Condition | Test Method | TEIJIN JAPAN/MN-3600H |
|---|---|---|---|
| Burning wire flammability index | 1.0mm | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | 3.0mm | IEC60695-2-13 | 825 °C |
| UL flame retardant rating | 2.0mm | UL94 | 5VB |
| Burning wire flammability index | 1.5mm | IEC60695-2-12 | 930 °C |
| UL flame retardant rating | 0.45mm | UL94 | HB |
| Hot filament ignition temperature | 1.0mm | IEC60695-2-13 | 875 °C |
| 1.5mm | IEC60695-2-13 | 825 °C | |
| UL flame retardant rating | 1.5mm | UL94 | V-0 |
| Burning wire flammability index | 3.0mm | IEC60695-2-12 | 930 °C |
| UL flame retardant rating | 1.0mm | UL94 | V-1 |
| Burning wire flammability index | 2.0mm | IEC60695-2-12 | 960 °C |
| UL flame retardant rating | 3.0mm | UL94 | 5VA |
| Hot filament ignition temperature | 2.0mm | IEC60695-2-13 | 825 °C |
| physical property | Test Condition | Test Method | TEIJIN JAPAN/MN-3600H |
|---|---|---|---|
| Melt volume flow rate | 280°C/2.16kg | ISO1133 | 17.5 cm3/10min |
| Water absorption rate | 23°C,24hr | ISO62 | 0.22 % |
| Shrinkage rate | MD:4.00mm | 内部方法 | 0.50to0.70 % |
| TD:4.00mm | 内部方法 | 0.50to0.70 % |
| Thermal performance | Test Condition | Test Method | TEIJIN JAPAN/MN-3600H |
|---|---|---|---|
| TD | ISO11359-2 | 7E-05 cm/cm/°C | |
| 0.45MPa,未退火 | ISO75-2/B | 125 °C | |
| RTI Elec | 1.5mm | UL746 | 95.0 °C |
| RTI Str | 1.5mm | UL746 | 95.0 °C |
| ASTM D648/ISO 75 | 125 ℃（℉） | ||
| 1.8MPa,未退火 | ISO75-2/A | 112 °C | |
| RTI Imp | 1.5mm | UL746 | 95.0 °C |
| MD | ISO11359-2 | 7E-05 cm/cm/°C | |
| Linear expansion coefficient | ASTM D696/ISO 11359 | 0.000070 mm/mm.℃ |
Contact Us
Get App
Top