Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS POLYblend PC/ABS 45V POLYKEMI SWEDEN
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | POLYKEMI SWEDEN/POLYblend PC/ABS 45V |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 30 kJ/m² |
| -20°C | ISO 179 | 20 kJ/m² |
| Mechanical properties | Test Condition | Test Method | POLYKEMI SWEDEN/POLYblend PC/ABS 45V |
|---|---|---|---|
| Flexural modulus | 23°C | ISO 178 | 2400 MPa |
| Tensile strain | 屈服 | ISO 527-2 | 4.5 % |
| bending strength | ISO 178 | 85.0 MPa |
| flammability | Test Condition | Test Method | POLYKEMI SWEDEN/POLYblend PC/ABS 45V |
|---|---|---|---|
| UL flame retardant rating | 2.5mm | UL 94 | V-2 |
| Hot filament ignition temperature | 1.6mm | IEC 60695-2-13 | 960 °C |
| physical property | Test Condition | Test Method | POLYKEMI SWEDEN/POLYblend PC/ABS 45V |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.50to0.70 % |
| MD | ISO 294-4 | 0.50to0.70 % | |
| melt mass-flow rate | 240°C/5.0kg | ISO 1133 | 20 g/10min |
| density | ISO 1183 | 1.19 g/cm³ |
| Thermal performance | Test Condition | Test Method | POLYKEMI SWEDEN/POLYblend PC/ABS 45V |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 100 °C |
| vicat | ISO 306/B50 | 105 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 90.0 °C |
Contact Us
Get App
Top