Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Electrafil® PC-50/EC Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC-50/EC |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C,3.18mm | ASTM D256 | 1100 J/m |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 80 J/m |
| Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC-50/EC |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 96.5 MPa |
| tensile strength | 23°C | ASTM D638 | 58.6 MPa |
| Flexural modulus | 23°C | ASTM D790 | 2620 MPa |
| elongation | 断裂,23°C | ASTM D638 | 6.0 % |
| Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC-50/EC |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 5.5E+03 ohms |
| flammability | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC-50/EC |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-2 |
| physical property | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC-50/EC |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.15 % |
| density | ASTM D792 | 1.21 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.50 % |
| Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/Electrafil® PC-50/EC |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 121 °C |
Contact Us
Get App
Top