Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC HiFill® PC 0272 S1 Techmer Polymer Modifiers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC 0272 S1 |
---|---|---|---|
Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 53 J/m |
hardness | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC 0272 S1 |
---|---|---|---|
Rockwell hardness | R级 | ASTM D785 | 118 |
Mechanical properties | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC 0272 S1 |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 8.0 % |
屈服 | ASTM D638 | 2.0 % | |
Flexural modulus | ASTM D790 | 2900 MPa | |
tensile strength | 断裂 | ASTM D638 | 66.9 MPa |
屈服 | ASTM D638 | 43.4 MPa | |
bending strength | ASTM D790 | 82.7 MPa |
Electrical performance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC 0272 S1 |
---|---|---|---|
Volume resistivity | ASTM D257 | 1E+17 ohms·cm | |
dielectric strength | ASTM D149 | 18 kV/mm |
flammability | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC 0272 S1 |
---|---|---|---|
UL flame retardant rating | 1.5mm | UL 94 | V-2 |
physical property | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC 0272 S1 |
---|---|---|---|
Water absorption rate | 24hr | ASTM D570 | 0.15 % |
density | ASTM D792 | 2.71 g/cm³ | |
Shrinkage rate | MD:3.18mm | ASTM D955 | 0.40 % |
melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 6.0 g/10min |
Thermal performance | Test Condition | Test Method | Techmer Polymer Modifiers/HiFill® PC 0272 S1 |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 132 °C |
0.45MPa,未退火,HDT | ASTM D648 | 138 °C | |
Linear coefficient of thermal expansion | MD | ASTM D696 | 7E-05 cm/cm/°C |
Contact Us
Get App
Top