Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP PJ914 Malaysia DaTeng
--
Hangers, lids, household utensils, toys, pill boxes, pen caps, pen holders and universal molds
Compliant with FDA, 21, CFR, 177, 1520 (a) (1) (i) (b) and (c) 1, 1a, TSCA, CAS # 9003-07-0, advantages, shorter injection cycle time, good processing performance, high rigidity, good thermal stability, processing, piston or screw injection molding machines, general operating conditions
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Malaysia DaTeng/PJ914 |
|---|---|---|---|
| Water absorption rate | 24小时 | ASTM D-570 | 0.02 % |
| melt mass-flow rate | 230℃ | ASTM D-1238 | 14 g/10min |
| density | ASTM D-1505 | 0.9 g/cm |
| Mechanical properties | Test Condition | Test Method | Malaysia DaTeng/PJ914 |
|---|---|---|---|
| Rockwell hardness | ASTM D-785A | 100 R | |
| Tensile strength (drop point) | ASTM D-638 | 360 kg/cm | |
| Impact strength of cantilever beam gap | 缺口，23℃ | ASTM D-256A | 2.6 kg.cm/cm |
| elongation at break | ASTM D-638 | 8 % | |
| Flexural modulus | ASTM D-790B | 17500 kg/cm |
| Thermal performance | Test Condition | Test Method | Malaysia DaTeng/PJ914 |
|---|---|---|---|
| Heat distortion temperature | 4.6kg/cm，HDT | ASTM D-648 | 105 ℃ |
Contact Us
Get App
Top