plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE) PRL PPX-FRG10 Polymer Resources Ltd.
--
--
Filler, glass fiber reinforced material, 10%, filler by weight,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodPolymer Resources Ltd./PRL PPX-FRG10
Rockwell hardnessL-SaleASTM D785104
thermal performanceTest ConditionTest MethodPolymer Resources Ltd./PRL PPX-FRG10
Hot deformation temperature0.45MPa,Unannealed,3.18mmASTM D648132 °C
1.8MPa,Unannealed,3.18mmASTM D648127 °C
RTI1.5mmUL 74665.0 °C
3.0mmUL 74665.0 °C
RTI Elec1.5mmUL 74665.0 °C
3.0mmUL 74665.0 °C
RTI Imp1.5mmUL 74665.0 °C
3.0mmUL 74665.0 °C
Vicat softening temperatureASTM D15253146 °C
mechanical propertiesTest ConditionTest MethodPolymer Resources Ltd./PRL PPX-FRG10
Bending modulus3.18mmASTM D7903720 MPa
bending strength3.18mmASTM D790117 MPa
elongationBreakASTM D6385.0 %
tensile strengthYield,3.18mmASTM D63877.2 MPa
Break,3.18mmASTM D63875.8 MPa
Electrical performanceTest ConditionTest MethodPolymer Resources Ltd./PRL PPX-FRG10
Volume resistivityASTM D2571E+16 ohms·cm
Physical propertiesTest ConditionTest MethodPolymer Resources Ltd./PRL PPX-FRG10
densityASTM D7921.15 g/cm³
melt mass-flow rate250°C/11.6kgASTM D12381.0to8.0 g/10min
Shrinkage rateMD：3.18mmASTM D9550.20to0.50 %
impact performanceTest ConditionTest MethodPolymer Resources Ltd./PRL PPX-FRG10
Charpy Notched Impact Strength23°CISO 179/16.3 kJ/m²
Impact strength of cantilever beam gap-40°C,3.18mmASTM D25669 J/m
23°C,3.18mmASTM D25685 J/m
flammabilityTest ConditionTest MethodPolymer Resources Ltd./PRL PPX-FRG10
UL flame retardant rating3.0mmUL 94V-1
1.5mmUL 94V-1

Contact Us

Get App

Top