Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
DAP RX® 3-1-530-P SBHPP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SBHPP/RX® 3-1-530-P |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256A | 170 J/m |
| Electrical performance | Test Condition | Test Method | SBHPP/RX® 3-1-530-P |
|---|---|---|---|
| dielectric strength | ASTM D149 | 13 kV/mm | |
| Dissipation Factor | 1MHz | ASTM D150 | 0.018 |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112,ASTMD3638 | PLC 0 | |
| dielectric constant | 1MHz | ASTM D150 | 3.50 |
| arc resistance | ASTM D495 | 130 sec |
| Mechanical properties | Test Condition | Test Method | SBHPP/RX® 3-1-530-P |
|---|---|---|---|
| tensile strength | ASTM D638 | 70.0 MPa | |
| compressive strength | ASTM D695 | 140 MPa | |
| Flexural modulus | ASTM D790 | 20000 MPa | |
| bending strength | ASTM D790 | 110 MPa |
| flammability | Test Condition | Test Method | SBHPP/RX® 3-1-530-P |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| Limiting Oxygen Index | ASTM D2863 | 30 % |
| physical property | Test Condition | Test Method | SBHPP/RX® 3-1-530-P |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.10to0.40 % |
| Apparent density | ASTM D1895 | 0.45 g/cm³ | |
| density | ASTM D792 | 1.76 g/cm³ | |
| Water absorption rate | ASTM D570 | 0.28 % |
| Thermal performance | Test Condition | Test Method | SBHPP/RX® 3-1-530-P |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648A | 260 °C |
| RTI Imp | UL 746 | 130 °C | |
| Linear coefficient of thermal expansion | MD | ASTME831 | 2.2E-05 cm/cm/°C |
| RTI | UL 746 | 130 °C | |
| RTI Elec | UL 746 | 130 °C |
Contact Us
Get App
Top