Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 K224-HG8 DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodDSM Additive Manufacturing/ K224-HG8
Charpy Notched Impact Strength23°CISO 179/1eA18 kJ/m²
-30°CISO 179/1eA13 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU95 kJ/m²
-30°CISO 179/1eU85 kJ/m²
Electrical performanceTest ConditionTest MethodDSM Additive Manufacturing/ K224-HG8
dielectric strengthIEC 60243-135 kV/mm
Volume resistivityIEC 600931E+14 ohms·cm
relative permittivity100HzIEC 602503.50
Dissipation Factor100HzIEC 602505E-03
relative permittivity1MHzIEC 602503.30
Surface ResistivityIEC 60093-- ohms
Dissipation Factor1MHzIEC 602500.015
Compared to the Leakage Tracking Index (CTI)IEC 60112 V
Mechanical propertiesTest ConditionTest MethodDSM Additive Manufacturing/ K224-HG8
Tensile strain断裂ISO 527-23.0 %
Tensile modulusISO 527-213000 MPa
tensile strength 断裂ISO 527-2205 MPa
Flexural modulusISO 17810800 MPa
bending strengthISO 178275 MPa
flammabilityTest ConditionTest MethodDSM Additive Manufacturing/ K224-HG8
UL flame retardant rating1.5mmIEC 60695-11-10,-20HB
0.71mmIEC 60695-11-10,-20HB
physical property Test ConditionTest MethodDSM Additive Manufacturing/ K224-HG8
Shrinkage rateTDISO 294-40.83 %
MDISO 294-40.34 %
Water absorption rate平衡,23°C,50%RHISO 621.7 %
饱和,23°CISO 625.5 %
densityISO 11831.45 g/cm³
Thermal performanceTest ConditionTest MethodDSM Additive Manufacturing/ K224-HG8
melting temperatureISO 11357-3220 °C
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/B220 °C
1.8MPa,未退火，HDTISO 75-2/A200 °C
Linear coefficient of thermal expansionMDISO 11359-22E-05 cm/cm/°C
TDISO 11359-25E-05 cm/cm/°C

Contact Us

Get App

Top