Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PAEK AV-722 SOLVAY BELGIUM
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SOLVAY BELGIUM/ AV-722 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -- | ISO 180 | 7.0 kJ/m² |
| Suspended wall beam without notch impact strength | ASTMD4812 | 无断裂 | |
| Impact strength of cantilever beam gap | -- | ASTM D256 | 80 J/m |
| hardness | Test Condition | Test Method | SOLVAY BELGIUM/ AV-722 |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 95 |
| Electrical performance | Test Condition | Test Method | SOLVAY BELGIUM/ AV-722 |
|---|---|---|---|
| Dissipation Factor | 60Hz | ASTM D150 | 1E-03 |
| dielectric strength | 3.00mm | ASTM D149 | 19 kV/mm |
| dielectric constant | 60Hz | ASTM D150 | 3.12 |
| Volume resistivity | ASTM D257 | 3.1E+17 ohms·cm | |
| Dissipation Factor | 1MHz | ASTM D150 | 4E-03 |
| Surface Resistivity | ASTM D257 | >1.9E+17 ohms | |
| dielectric strength | 0.0500mm,非晶膜 | ASTM D149 | 170 kV/mm |
| dielectric constant | 1MHz | ASTM D150 | 3.06 |
| Mechanical properties | Test Condition | Test Method | SOLVAY BELGIUM/ AV-722 |
|---|---|---|---|
| bending strength | -- | ASTM D790 | 141 MPa |
| elongation | 断裂3 | ASTM D638 | 25 % |
| compressive strength | ASTM D695 | 112 MPa | |
| tensile strength | 屈服 | ISO 527-2/1A/50 | 91.0 MPa |
| Flexural modulus | -- | ASTM D790 | 3700 MPa |
| elongation | 屈服 | ISO 527-2/1A/50 | 4.5 % |
| Poisson's ratio | ASTME132 | 0.43 | |
| Tensile modulus | -- | ISO 527-2/1A/1 | 3900 MPa |
| tensile strength | --3 | ASTM D638 | 89.0 MPa |
| elongation | 屈服3 | ASTM D638 | 5.0 % |
| Flexural modulus | -- | ISO 178 | 3800 MPa |
| bending strength | -- | ISO 178 | 138 MPa |
| Tensile modulus | --3 | ASTM D638 | 3700 MPa |
| elongation | 断裂 | ISO 527-2/1A/50 | 25 % |
| shear strength | ASTM D732 | 79.0 MPa |
| flammability | Test Condition | Test Method | SOLVAY BELGIUM/ AV-722 |
|---|---|---|---|
| Limiting Oxygen Index | ASTM D2863 | 40 % |
| Filling analysis | Test Condition | Test Method | SOLVAY BELGIUM/ AV-722 |
|---|---|---|---|
| melt viscosity | 400°C,1000sec^-1 | 450 Pa·s |
| physical property | Test Condition | Test Method | SOLVAY BELGIUM/ AV-722 |
|---|---|---|---|
| melt mass-flow rate | 400°C/2.16kg | ASTM D1238 | 1.0 g/10min |
| Shrinkage rate | TD:3.18mm | ASTM D955 | 1.2to1.4 % |
| Water absorption rate | 24hr | ASTM D570 | 0.10 % |
| Shrinkage rate | MD:3.18mm | ASTM D955 | 0.80to1.0 % |
| density | ASTM D792 | 1.32 g/cm³ |
| Thermal performance | Test Condition | Test Method | SOLVAY BELGIUM/ AV-722 |
|---|---|---|---|
| thermal conductivity | ASTME1530 | 0.22 W/m/K | |
| Heat distortion temperature | 1.8MPa,退火,3.20mm，HDT | ASTM D648 | 161 °C |
| Linear coefficient of thermal expansion | MD：-50到50°C | ASTME831 | 4.5E-05 cm/cm/°C |
| specific heat | 50°C | DSC | 1410 J/kg/°C |
| 200°C | DSC | 1970 J/kg/°C | |
| melting temperature | ASTM D3418 | 340 °C | |
| Glass Transition Temperature | ASTM D3418 | 150 °C |
Contact Us
Get App
Top