Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP-R B240P HYOSUNG KOREA
TOPILENE®
PPR tube
High rigidity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic performance | Test Condition | Test Method | HYOSUNG KOREA/B240P |
---|---|---|---|
melt mass-flow rate | 230℃,2.16Kg | ASTM D-1238 | 0.4 g/10min |
density | ASTM D-792 | 0.91 g/cm |
Mechanical properties | Test Condition | Test Method | HYOSUNG KOREA/B240P |
---|---|---|---|
Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 无破损 kg.cm/cm |
tensile strength | 屈服点 | ASTM D-638 | 270 kg/cm |
断点 | ASTM D-638 | 240 kg/cm | |
Impact strength of cantilever beam gap | 0℃ | ASTM D-256 | 10 kg.cm/cm |
elongation at break | ASTM D638/ISO 527 | 200 kg/cm²(MPa)[Lb/in²] | |
Flexural modulus | ASTM D-790 | 11500 kg/cm | |
Charpy Notched Impact Strength | ASTM D256/ISO 179 | 12 kg·cm/cm(J/M)ft·lb/in | |
Impact strength of cantilever beam gap | -20℃ | ASTM D-256 | 6 kg.cm/cm |
Rockwell hardness | ASTM D785 | 90 | |
elongation at break | ASTM D-638 | 500 % |
Electrical performance | Test Condition | Test Method | HYOSUNG KOREA/B240P |
---|---|---|---|
Volume resistivity | HS Method | >10 Ω |
Physical properties | Test Condition | Test Method | HYOSUNG KOREA/B240P |
---|---|---|---|
melt mass-flow rate | ASTM D1238/ISO 1133 | 0.4 g/10min |
Thermal performance | Test Condition | Test Method | HYOSUNG KOREA/B240P |
---|---|---|---|
vicat | ASTM D-1525 | 150 °C | |
Linear coefficient of thermal expansion | 0℃-110℃ | Dilatometor | 1.5×10 K |
melting temperature | HS Method | 162 °C |
Contact Us
Get App
Top